Which motor to swap in?
Thread Starter
Junior Member
Joined: Jul 1999
Posts: 50
Likes: 0
From: San Angelo TX. USA
Which motor to swap in?
I own way too many parts and I need to start using them. What is the best way to go?
I have a complete 305 TPI with a bad bottom end.
I have a 67 327 with 202's ect. runs great fresh heads. Option 1, install tpi on this motor.
I have a 96 Vortec 350 out of a truck with 16000 miles on it complete motor no wiring or computer? Option 2, buy the vortec base when it comes out and install tpi on this motor.
Option 4, buy a crate 350 and install the tpi on it. This is my least desirable option since I need to use some of the parts that I already own.
Option 5, Get a 350 short block and install a set of old style 202 heads and tpi. Not my favorite option but I do have three sets of these heads.
Option 6, I don't know do you guys have any suggestions.
------------------
2E,87 Formula 350,with coolant bypass and 160 thermostat and chip. 1986 Z28 with 327 & 202 heads and 5 speed, and usually 4 or 5 others Camaro's & 3 Firebirds to fix, Drive, or sell.
I have a complete 305 TPI with a bad bottom end.
I have a 67 327 with 202's ect. runs great fresh heads. Option 1, install tpi on this motor.
I have a 96 Vortec 350 out of a truck with 16000 miles on it complete motor no wiring or computer? Option 2, buy the vortec base when it comes out and install tpi on this motor.
Option 4, buy a crate 350 and install the tpi on it. This is my least desirable option since I need to use some of the parts that I already own.
Option 5, Get a 350 short block and install a set of old style 202 heads and tpi. Not my favorite option but I do have three sets of these heads.
Option 6, I don't know do you guys have any suggestions.
------------------
2E,87 Formula 350,with coolant bypass and 160 thermostat and chip. 1986 Z28 with 327 & 202 heads and 5 speed, and usually 4 or 5 others Camaro's & 3 Firebirds to fix, Drive, or sell.
Thread
Thread Starter
Forum
Replies
Last Post
