wiring harness for 2.8 mpfi to 350 tpi
Thread Starter
Member
iTrader: (1)
Joined: Feb 2001
Posts: 396
Likes: 0
From: kentucky
Car: 1990 GTA
Engine: L98
Transmission: manual/t56
wiring harness for 2.8 mpfi to 350 tpi
Does anyone know where I can get my 89 V6 harness modified to run a 86 350 tpi? The only place I knew of doesn't do it anymore. I have the harness out of the 86 but it looks nothing like the original. I don't know much about fuel injection so I really need help with it.
Member
Joined: Feb 2001
Posts: 464
Likes: 0
From: Lenhartsville, PA
www.howell-efi.com $350 and 2 weeks. They do a hell of a job.
------------------
'88 IROC TPI 355, '69 truck 4-bolt, fully balanced, 9.75:1 compression, fully ported '70 truck heads(for now), Harland Sharp 1.6 Roller Rockers, Comp Cams CS 252AH-12, ported '86 TPI converted to speed density, Crane AFPR, Flowmaster 3in. exhaust, Edelbrock TES headers, all emissions equipment is still intact, plan on burning my own chips, many more mods and parts on the way as time and money permits =(
Best E.T. with TBI 305: 16.11 @ 82mph
Haven't been to track with new motor
If you have any questions on converting from TBI to TPI email me at jdkchevy70@yahoo.com
In memory of Dale Earnhardt, I'll miss cheering for that black #3 on raceday!!!
------------------
'88 IROC TPI 355, '69 truck 4-bolt, fully balanced, 9.75:1 compression, fully ported '70 truck heads(for now), Harland Sharp 1.6 Roller Rockers, Comp Cams CS 252AH-12, ported '86 TPI converted to speed density, Crane AFPR, Flowmaster 3in. exhaust, Edelbrock TES headers, all emissions equipment is still intact, plan on burning my own chips, many more mods and parts on the way as time and money permits =(
Best E.T. with TBI 305: 16.11 @ 82mph
Haven't been to track with new motor
If you have any questions on converting from TBI to TPI email me at jdkchevy70@yahoo.com
In memory of Dale Earnhardt, I'll miss cheering for that black #3 on raceday!!!
Thread
Thread Starter
Forum
Replies
Last Post
