I'm gonna be buying the GM Performance (Base) 350 HO from Jegs for $2099 I've heard that you supposed to have a vortec intake because of the vortec heads..... why can't ya just have the Stock TPI intake??? I don't wanna switch to carb because carb sucks ya have to tune it constantly.

------------------
IROC-Z
G92, LB9 305 TPI, 3.23

 

the stock intake won't bolt up to the Vortech heads

------------------
88 TBI IROC- mods- 5500 rpm redline tach, 240 KM/H speedo,
L69 air cleaner (installed someday

 

the stock intake won't bolt up to the Vortech heads

------------------
88 TBI IROC- mods- 5500 rpm redline tach, 240 KM/H speedo,
L69 air cleaner (installed someday

 

So what would be a good road to Go I really wanna keep the TPI intake maybe Edelbrock or Vortech makes an TPI Intake or what???

 

Would it be possible to just ask to have different heads instead of the Vortech????

------------------
IROC-Z
G92, LB9 305 TPI, 3.23

 

Go to

http://www.sdpc2000.com

There should be some info on a lower intake (base plate? I think) that will match the heads up.

------------------
88 TBI IROC- mods- 5500 rpm redline tach, 240 KM/H speedo,
L69 air cleaner (installed someday

[This message has been edited by 871LEIroc (edited April 27, 2001).]