blown up 305
Thread Starter
Junior Member
Joined: Jan 2008
Posts: 8
Likes: 0
From: carrollton Virginia
Car: 1988 camaro
Engine: 305 tbi
Transmission: 700r
Axle/Gears: 3.73 posi
blown up 305
I need help.My 305 in my 88 camaro is done.I pulled it out with the 700r attached.The problem is i can not seperate the trans and the engine because the engine is locked up.So i can not get to the bolts on the flywheel/converter.Any ideas would be a big help.
Supreme Member
iTrader: (7)
Joined: Jan 2009
Posts: 1,176
Likes: 4
From: Moneta, VA
Car: 88 GTA
Engine: 305 TPI
Transmission: WC T5
Axle/Gears: BW 9-bolt 3.27 posi
Re: blown up 305
It is possible to remove the trans with the torque converter still attached to the flywheel. It slips into the front pump on splined shafts. You need to be careful to support the weight of the tranny as you remove it to avoid damage to the pump.
Supreme Member
iTrader: (7)
Joined: Jan 2009
Posts: 1,176
Likes: 4
From: Moneta, VA
Car: 88 GTA
Engine: 305 TPI
Transmission: WC T5
Axle/Gears: BW 9-bolt 3.27 posi
Re: blown up 305
Glad to help. BTW, stick with this board. You will be amazed at the resources that are available here, plus lots of people eager to help.
Thread
Thread Starter
Forum
Replies
Last Post
