What manifold can I use with these heads?
Thread Starter
Junior Member
Joined: Jun 2001
Posts: 74
Likes: 0
What manifold can I use with these heads?
I am rebuilding a pair of heads that I aquired (casting no. 14101083) which I believe is a vortec style head, but I cannot find a carbureted intake manifold to fit these. Can I use any intake from 87-up?
MorTec says that they are Gen. 1 heads w/ 72 degree center manifold bolt angles.
MorTec says that they are Gen. 1 heads w/ 72 degree center manifold bolt angles.
Supreme Member
Joined: Sep 2001
Posts: 6,111
Likes: 53
From: Ontario, Canada
Car: 1988 Firebird S/E
Engine: 406Ci Vortec SBC
Transmission: TH-350/3500stall
Axle/Gears: 7.5" Auburn 4.10 Posi-Traction
Those are not Vortec heads
There are some intake manifolds specific to fit those heads GM makes a hi perf marine
dual plane hi rise. Holley has one at least.
Most other sbc normal port heads can be modified to work by slotting out the center holes and using angled spacer washers.
There are some intake manifolds specific to fit those heads GM makes a hi perf marine
dual plane hi rise. Holley has one at least.
Most other sbc normal port heads can be modified to work by slotting out the center holes and using angled spacer washers.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
transaero
Engine/Drivetrain/Suspension Parts for Sale
2
Aug 31, 2015 01:14 AM