Front Brake line length
#1
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Crofton, Nebraksa
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 99 Z28 and 89 RS
Engine: LS1 and 350
Transmission: 4L60E and T350
Axle/Gears: 2.73 and 3.42
Front Brake line length
I used the search and could not find a answer. I was wondering if anyone knew the length of the brake line that runs from the proportioning valve across the top of the K Member to the passenger side brake hose on a V8 car. I am swapping a V6 to a V8 and I want to replace the line with a new one that is the correct length. This is on a 89 if that is needed
Thanks
Thanks
#3
Junior Member
Thread Starter
Join Date: Jun 2010
Location: Crofton, Nebraksa
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 99 Z28 and 89 RS
Engine: LS1 and 350
Transmission: 4L60E and T350
Axle/Gears: 2.73 and 3.42
Re: Front Brake line length
I might bend the V6 one and mount it were the V8 one goes then measure it and make a new one.
Thread
Thread Starter
Forum
Replies
Last Post