best power upgrade?
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 29
Likes: 0
From: Cameron, North Carolina
Car: 1991 Chevy Camaro RS
Engine: 350 carburated
Transmission: T-5
Axle/Gears: 3.73 Posi
best power upgrade?
Hey everyone, i have a 350 targetmaster engine with the stock heads and cam, with edelbrock performer eps and edelbrock performer 600cfm carb, and headers with hei of course and i was wondering what would be a good first thing to change to increase power. I hope to be able to use my intake and carb if possible but like suggestions, and i am on a budget unfortuantly.. would like a few tips or thoughts.. thanks. 

Member
Joined: Jul 2010
Posts: 258
Likes: 0
From: Niagara falls,ontario
Car: 84 firebird
Engine: 355
Transmission: 700r4 stage 2 shift kit 2500 stall
Axle/Gears: 3.42 posi
Re: best power upgrade?
Hey everyone, i have a 350 targetmaster engine with the stock heads and cam, with edelbrock performer eps and edelbrock performer 600cfm carb, and headers with hei of course and i was wondering what would be a good first thing to change to increase power. I hope to be able to use my intake and carb if possible but like suggestions, and i am on a budget unfortuantly.. would like a few tips or thoughts.. thanks. 



.30 over ,mild cam(dont remember lift),dish pistons,416 ported and polished heads,qjet 750 cfm, eldlebrock performer intake,roller tip rockers,steel crank,e3 spark plugs,accel wires,hei with advance curve, headman shorty headers,so that combo gives you a basic idea that you dont have to do much to get a power upgrade just need a good combo
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 29
Likes: 0
From: Cameron, North Carolina
Car: 1991 Chevy Camaro RS
Engine: 350 carburated
Transmission: T-5
Axle/Gears: 3.73 Posi
Re: best power upgrade?
well idk if the 305 head i have are the good ones.. they are 53cc so i know the compression would be high and they also have the .190 intake valves..
Thread Starter
Junior Member
Joined: Apr 2010
Posts: 29
Likes: 0
From: Cameron, North Carolina
Car: 1991 Chevy Camaro RS
Engine: 350 carburated
Transmission: T-5
Axle/Gears: 3.73 Posi
Re: best power upgrade?
also 446hp at flywheel do you know what you run in the 1/4 mile also.. what is your rpm redline? if you dont mind me asking.
Member
Joined: Jul 2010
Posts: 258
Likes: 0
From: Niagara falls,ontario
Car: 84 firebird
Engine: 355
Transmission: 700r4 stage 2 shift kit 2500 stall
Axle/Gears: 3.42 posi
Re: best power upgrade?
havent run the 1/4 yet next season gettin to cold here snow soon and to see if they are 416 check the number in the head by the valve springs the last 3 numbers will be 416 lol and i don't have my tach hooked up yet but it sounds around 600-1000 in drive not to high nice muscle sound lol
Member
Joined: Jul 2010
Posts: 258
Likes: 0
From: Niagara falls,ontario
Car: 84 firebird
Engine: 355
Transmission: 700r4 stage 2 shift kit 2500 stall
Axle/Gears: 3.42 posi
Trending Topics
Member
Joined: Aug 2009
Posts: 332
Likes: 0
From: AZ
Car: 1978 Chevrolet impala
Engine: 350ci 300hp/356tq pace crate
Transmission: 700r4
Axle/Gears: 3.42 Yukon posi
Re: best power upgrade?
He's asking what your REDLINE is. With 305 heads you will need some pretty impressive portwork to not run out of air after 4500 or so rpm.
Not saying it cant be done, just that it will take serious work.
Not saying it cant be done, just that it will take serious work.
Member
Joined: Jul 2010
Posts: 258
Likes: 0
From: Niagara falls,ontario
Car: 84 firebird
Engine: 355
Transmission: 700r4 stage 2 shift kit 2500 stall
Axle/Gears: 3.42 posi
Re: best power upgrade?
sorry i thought i read whats my idle..and im not sure no tach but its prob around 4000-4500 and the guy that did my port work is amazing
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Problems / Help / Suggestions / Comments
2
Aug 24, 2015 10:11 PM





