Turbo head ideas
Thread Starter
Senior Member
iTrader: (1)
Joined: Jun 2009
Posts: 564
Likes: 0
From: N.E. Ohio
Car: 87 Gta
Engine: 5.3
Transmission: 4l60e
Axle/Gears: 3.42
Turbo head ideas
Hey guys,
I was planning on upgrading my heads soon and was wondering if you guys could help me pick a nice set out so i could get a good bang for my buck. Motor is a 355 that will be twin turbo'd using t3/4 hybrids (57 mm) i plan on staying around 10 psi and i would like to be around 9.5:1 compression. I originally used dished pistons in the motor. cam specs are http://www.compcams.com/Company/CC/c...?csid=129&sb=0 Any help on this would be great thanks!
I was planning on upgrading my heads soon and was wondering if you guys could help me pick a nice set out so i could get a good bang for my buck. Motor is a 355 that will be twin turbo'd using t3/4 hybrids (57 mm) i plan on staying around 10 psi and i would like to be around 9.5:1 compression. I originally used dished pistons in the motor. cam specs are http://www.compcams.com/Company/CC/c...?csid=129&sb=0 Any help on this would be great thanks!
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM