im getting around to putting my headers on. i have the cheap long tube hedmans. i think they were around $119. does anyone know if i will have floor pan clearance problems? and what should i do with the o2 sensor

 

I have them and there are no floor pan issues but the lower control arm mount on the drivers side gets in the way and must be cut back a little and I just put the O2 in the drivers side collector. You need to get the hedman x-tensions as well to drop the exhaust below the tranny crossmember and then you will have to have someone fab up a y-pipe unless you plan on true duals of some sort.

Here is a link to pics of my y-pipe https://www.thirdgen.org/techbb2/sho...hreadid=206181

 

i haven't figured out how i want to run the rest of the exhaust yet...can someone please post direct shot of the bottom of the car. im thinking hedman extentions right after the headers, h-pipe, then either moroso spirals or carchemistry's collector inserts. i want it to exit right before the rearend. any opinions??

 

Here is a little more info maybe this could be of some help. https://www.thirdgen.org/techbb2/sho...hreadid=157587