Borla Cat-back for cheap?
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 671
Likes: 0
From: North Olmsted, OH
Car: 1984 Pontiac Trans Am WS6
Engine: H.O. 305 5.0L;L69
Transmission: T-5; Axle Ratio 3.73
Borla Cat-back for cheap?
Are these guys legit....they sell the borla cat-back for $479
http://www.customracer.com/firebird_exhaust.html
If this is legit then it would make it much more comparable with the banks system and not make me want to cringe when I see the price.
http://www.customracer.com/firebird_exhaust.html
If this is legit then it would make it much more comparable with the banks system and not make me want to cringe when I see the price.
I am 99% sure it will only be the REAR SECTION of the exhaust..muffler and tailpipe!..not the entire catback system!..If you look at the prices of the other systems they are considerably higher in price and basically the cat backs have the same componentry,adjustability etc between all the year models.Be very WARY on this because I think i remember hearing somthing like this long ago where someone thought he was getting the entire system from Summit at that price and ended up just getting the muffler section!
Member
iTrader: (1)
Joined: Nov 2002
Posts: 367
Likes: 0
From: TX
Car: 97 Z28
Engine: LT1
Transmission: A4
Axle/Gears: 3.73
Wow that is cheap. That's the part number for the cat-back, not just the rear section but it's a little too good to be true. I'd call them to make sure it's not a typo or something.
Thunder Racing is cheapest I've seen at $599.
Thunder Racing is cheapest I've seen at $599.
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 671
Likes: 0
From: North Olmsted, OH
Car: 1984 Pontiac Trans Am WS6
Engine: H.O. 305 5.0L;L69
Transmission: T-5; Axle Ratio 3.73
Well the part number is 14888 and that is for the entire cat-back not just the rear section. And, it does sound to good to be true. Thats why I am worried.
Supreme Member
Joined: Jan 2000
Posts: 1,298
Likes: 0
From: Salem, NH
Car: 1999 Chevy Cavalier
Engine: 2.2
Transmission: 5 speed
Axle/Gears: it's part of the transmission
when I bought my Borla, the pipes were all bent wrong. That was a $600 system too. #14888, I had to pay another $150 to have it all cut and re-welded to fit my car properly.....some quality parts right there.
Yes, I did ask for a refund and Borla basically told me to eat ----
I know some people have had better luck, but if they burn one of us, they burn us all.
DON'T BUY BORLA'S '82-'92 system.
I've heard it all, "just adjust the pipes" "blabity bla bla" I'm not an idiot, all of the intermeadiate sections pipes had the wrong bends in them. Borla doesn't even provide the part that meets the cat, thier 'cat-back' ends about where the end of the transmission is, not exactly a bolt-on in the first place.
Not only did they sell me a complete set of junk that costed me another $150 just to make FIT my car, it's an all together rip-off system. They offered nothing to fix the problem, nothing at all.
For $600 you can get a set of headers and even a whole cat back.
304 stainless will outlast every part of your car, so what's the point?
Yes, I did ask for a refund and Borla basically told me to eat ----
I know some people have had better luck, but if they burn one of us, they burn us all.
DON'T BUY BORLA'S '82-'92 system.
I've heard it all, "just adjust the pipes" "blabity bla bla" I'm not an idiot, all of the intermeadiate sections pipes had the wrong bends in them. Borla doesn't even provide the part that meets the cat, thier 'cat-back' ends about where the end of the transmission is, not exactly a bolt-on in the first place.
Not only did they sell me a complete set of junk that costed me another $150 just to make FIT my car, it's an all together rip-off system. They offered nothing to fix the problem, nothing at all.
For $600 you can get a set of headers and even a whole cat back.
304 stainless will outlast every part of your car, so what's the point?
Senior Member

Joined: Jul 1999
Posts: 700
Likes: 0
From: Pineville, NC US
Car: An '87 Italian Retard Out Cruisin'
Engine: LS1 install in progress
Transmission: 4L60e
Axle/Gears: 9 bolt
yeah what he said, the borla cat back isn't worth it. If you really like the adjusability, an exhaust shop should be able to fab one up for you fairly cheap compared to the Borla 14888 piece of crap.
Trending Topics
i dunno but mine (14888) fit perfectly.
only bad thing is tail pipes but im runnin none right now...it actually sounds alot better without um. im happy.
they recently raised the price which sucks.
only bad thing is tail pipes but im runnin none right now...it actually sounds alot better without um. im happy.

they recently raised the price which sucks.
Thread
Thread Starter
Forum
Replies
Last Post
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM





