Need help finding headers
Member
Joined: Feb 2004
Posts: 111
Likes: 0
From: Stoneville, N.C.
Car: '88 IROC-Z
Engine: 305 tpi
Transmission: 700r4/OD
I can tell you right now, you'll get alot of feedback from this thread. There's so many different opinions.
Have you looked at any of the previous threads on this subject?
Anyway, from all my dealings with putting headers on my camaro, I think I would have chosen the SLP ceramic coated long tubes. I'm not sure where the best place is to get them. I know they're not cheap, but after you've put one set on, you'll won't care to change them again.
But, if you're hard-headed (like I am) and you still want to go the cheap way. Summit Racing and Jeg's have various selections of headers that come painted with shipping paint that will have to be sand-blasted off and painted with high heat header paint.
Another important thing to remember is to make sure that the ID on the tubes equal to or exceed the port size coming from the heads. At least get 1 1/2" to 1 3/4".
P.S. I'm not an expert on this subject. I've learned alot of this info from reading these forums. (This was included for those of you who are bound and determined to beat me down for my suggestions).
Have you looked at any of the previous threads on this subject?
Anyway, from all my dealings with putting headers on my camaro, I think I would have chosen the SLP ceramic coated long tubes. I'm not sure where the best place is to get them. I know they're not cheap, but after you've put one set on, you'll won't care to change them again.
But, if you're hard-headed (like I am) and you still want to go the cheap way. Summit Racing and Jeg's have various selections of headers that come painted with shipping paint that will have to be sand-blasted off and painted with high heat header paint.
Another important thing to remember is to make sure that the ID on the tubes equal to or exceed the port size coming from the heads. At least get 1 1/2" to 1 3/4".
P.S. I'm not an expert on this subject. I've learned alot of this info from reading these forums. (This was included for those of you who are bound and determined to beat me down for my suggestions).
Senior Member

Joined: Oct 2002
Posts: 694
Likes: 0
From: Glasgow Kentucky
Car: 04 Vette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73
Re: true duals
Originally posted by 86camedcamaro
i was gonna run dual exhaust and drop it at the rear axles with dyno max bullets how would that sound with a 350 all worked
i was gonna run dual exhaust and drop it at the rear axles with dyno max bullets how would that sound with a 350 all worked
Trending Topics
Supreme Member
iTrader: (2)
Joined: Feb 2002
Posts: 1,141
Likes: 0
From: Nashville TN
Car: 1989 Trans Am
Engine: 355 HSR
Transmission: Pro-Built 700r4 w/ 3400 converter
Axle/Gears: 10 bolt w/ 3.42 gears
Re: hmm
Originally posted by 86camedcamaro
why you call me a red neck
why you call me a red neck
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: hmm
Originally posted by 86camedcamaro
why you call me a red neck
why you call me a red neck
"It would sound red neck."
I just took a pair off of the '57. Great at the track, cop bait on the street.
Thread
Thread Starter
Forum
Replies
Last Post
Dyno Don
Engine/Drivetrain/Suspension Parts for Sale
17
Nov 2, 2015 11:43 PM
hectre13
Engine/Drivetrain/Suspension Parts for Sale
6
Sep 8, 2015 03:38 PM
[For Sale] 1 3/4 budget LS swap headers NEW (CA)
topteam54
LSX and LTX Parts
10
Aug 11, 2015 07:15 PM






