Hey Ive Got A 1985 Camaro With A Mild 350 Carb'd With A t-5 Im Going To Get The Hooker 2055's These WILL Fit My Car Correct? Its A Aftermarket Goodwrench Block.

Also Wheres The Cheapest Place For These Headers?

One Other Things, Will These Work For A 350, They Say ONLY For A 5.0?
http://cgi.ebay.com/ebaymotors/82-92...QQcmdZViewItem

Thanks,

 

Yes, I'm running them on my 85 IROC (350 HO Deluxe). I had the emissions pipes removed and the holes welded. No biggie. The y-pipe is vastly superior to others, so IMO these are the headers you'll want. I purchased mine from Jeg's. By the way, your dipstick may not fit with these headers. I can dig up the part # for one that will, however, if you want.

JamesC

 

hey could you post pics or part numbers of where they might not fit right plz sorry for highjacking i was gonna buy them to can't do true duals roads are bad around here

 

I'm unsure of what you mean. The 2055's (Jeg's 520-2055) are designed for 86-90 Camaro/Firebird, 305/350 TPI. I used the 2055s, the Catco 9118, and the Hooker catback--everything a bolt-up (though, IIRC, on some cars, the AC bracket requires the removal of a leg).

JamesC

 

Will These Fit A 85 Or JUST A 86-90? And If You Could Find That Part Number It Would Be Great.

Thanks,

 

Check the following link for info that may put your apprehension at rest--or do a search:

https://www.thirdgen.org/forums/exha...highlight=2055

Here's info on the dipstick:

http://www.sallee-chevrolet.com/fram...4dipstick.html

JamesC

 

I used a dipstick from a 94 Chevy truck (350), worked great!