I'm gonna be buying the 2055's off of jegs on thursday and i wanted to make sure that these header bolts are the correct size

http://www.jegs.com/i/Stage+8/868/8911/10002/-1

and are these wires sufficient? for the 2055's?

http://www.jegs.com/i/MSD/121/5570/10002/-1

i don't need those special spark plug wire jackets or anything right?

these plugs are alright?

http://www.jegs.com/i/Accel+Spark+Pl.../276S/10002/-1

thanks guys

1990 RS 305 TBI

 

Hello, I have the same headers and also got the y pipe as a kit about 3 yrs ago. Header bolts should come with the headers, I know they did with mine. The plug wires will work fine, as long as they are 90 degree boots. Do yourself a favor too, route the plug wires to come up from UNDER the headers. If I can I will get you a pic i just did mine. Much cleaner and MUCH easier to keep the wires off the headers. I got the JEGS brand wiers though and they are working AWESOME. Check em out they are even a few bucks cheaper, and look great. Just tell em you want OE style under head wires so you can route em they way they are supposed to be.

 

You could try the hooker bolts, and if they come loose just get the stage 8s (yes those you have linked are correct). Plug wires look fine as long as they're long enough to fit under the headers. Mine are under the headers.

 

Alright, thanks alot pneumatic and 89IROC, yeah, the wires have *90 boots, i'm just hoping that they are long enough to route under the headers.

I read alot about the headers and the install already and decided that it's best to get the locking header bolts, i work at a tow yard and a friend of mine there installed headers and he didn't get locking bolts and he had to keep retightening them, and when he would forget to there would be a gap about 1/8 of an inch wide between the header and head sometimes, so i don't want to have to keep tightening them down, best to just lock them down and be finished with it.

Thanks alot again guys.