Hello where i live my old car 1989 trans am 5.7 dont need a cat to pass inspection and when the cat went bad i replaced it with a pipe. I dont want to remove the airpump for now and have closed the airpipe where it normal goes to the cat is that okay or ????

thanks claus

 

I see claus and I think of the Fish from American Dad. Anyway, delete that bi...big piece of weight. I bought my delete pulley from Hawks years ago, when it was about $45. Almost double now, but here you go. Hawks Smog Delete Pulley
TPIParts has it for $84.

 

$69.25

http://www.ebay.com/itm/131034924958...l2649#shpCntId

While some ebayers won't ship overseas, this one lists Denmark as a location they will ship to.

 

This is fun lol.
$48

 

Nothing wrong with finding the best price.

This one you linked to says A/C delete. I think the OP is after the air pump version. I'm assuming they are not interchangeable?

 

Correct, but the part number is for the Smog Delete Pulley. Plus the picture shows the 2bolt design of the smog delete pulley as well. It's just a typo. It's why I always search Part#'s.

 

Good catch!

 

just take the air pump off and use a different belt, no need for a delete pulley

 

do you happen to know a belt number?

 

Y does everyone buy a pulley you can remove it and install a smaller belt if its serpentine. I've been running this setup for years its cheaper and lighter weight!

I'll have to check my recites I just bought on I think the replacement was a 70. Most auto parts stores will let you buy multiple and bring back what you don't need.

 

my new smog pump pulley from hawks is wobbling a little bit . wat a piece tired of this ****

 

you will need a 96.8", 6 rib belt and look up the re-routing on this site.

 

I would bypass it with the shorter belt as suggested I've been running this setup for years with zero problems

 

I wasted 100 bucks lol

 

I bought a 96.8 in belt just like I did on my last TPI engine and removed smog pump and the belt was too dang long for the TBI engine.. I put it back on and will probably get the smog delete pulley from Amazon or get a string around it and measure like I should have first.

 

You sure you got the right belt and have it routed right? Works fine on my 91 TBI.

 

Im going to measure the belt myself it was listed 96.5 or 96.8 in if I can remember but you know things get mixed up in packaging sometimes. As far as the route yea I had a diagram and checked it over good. I was in a hurry and didn't physically measure the belt but im sure they will make good on it and trade me another if it wasn't what I ordered.

 

You don't have underdrive pulleys do you?

 

Serpentine setup is the same for tpi and tbi. I bought the 968k6 and used the alternate routing. Worked great.

 

I just went ahead and ordered the $48 smog delete pulley from Amazon. It does look a little cleaner with it instead of the hole it leaves when you take out the smog pump all together imo.