I was originally going to get edelbrock,but they are like $330. For half that I can get flowtech,and they seem just as good if not better. has anyone used them? What kind of performance increase over stock are they?

Thanks... -J

 

the afterburner flowtech,that is.

 

My guess is that you will have clearance problems with the afterburner flowtechs. Go with the flowtech headers designed for our cars; they are pretty good quality for the $$

 

Y pipe problems are no problem,its going to be custom made along with a custom 2 1/2" exhaust,no cat,into a dynomax muffler.

 

no but the afterburners are long tubes which hang down a lot and they're designed for 60's chevelles and camaros which have a lot of room between the front frame.

 

b4 u do anything, u gotta take emissions? u NEED those AIR tubes

 

http://www.holley.com/HiOctn/ProdLin.../CFheader.html
Still sitting in a box in the garage waiting to be installed. I can't wait to take off the stock manifold!

 

i don't know if it's just me, but looking at the above link, how in the hell does one hange spark plugS???????????

 

I think I need to get a harness for the wires.... It looks like it's gonna be a bear anyway...

 

if you haven't bought them don't... i have them on my car and fouled the plugs... pain *** to change the plugs... i've had other headers but i wouldn't reccomend buying them....

 

I have those ones too; what does your y pipe look like? Mine looks disgusting like the factory one.

 

Same dimensions as the headers.... 4 piece set....

 

i had a muffler shop make the y pipe... it looks ok...

 

No the Y pipe I have looks like the stock one with the intake on the passenger side like straight in. The picture on Holley looks like a better flowing Y pipe

 

I have exactly what is illustrated!

 

the only problem i have with my flowtechs is that the pasenger side header collector flange hits the frame rail
i think it is my motor mounts though
i love them
they are get for 305 because they are only 1.5" primaries
my 305 ta sounds like a dragster with the flowtech headers, their y-pipe, a straight pipe where the cat would be and the stock i pipe hooked up to a flomaster 80 series muffler
it sounds just as good and load as my friends 98 t/a with borla
and just to let you know that y pipe and headers in that picture is not the ones for our cars

 

I got cheated then. Should I contact Holley???

 

Thats what I thought; I thought that the picture was for V8 CK 2wd pick ups.

 

The 2 Headers, collector from drivers side to passenger Y in, and passenger collector to Y in.
It looks very similar to the illustration. Yes the collectors are the same as the Y in!