prowler, here's the current list, you are still on it, slot #5:

Headers:
1. 92BLKL98...............30003.............$415.00
2. AspiringGearhead...30005.............$385.00
3. 91L98Z28...............30002.............$415.00
4. transform................30002.............$415.00
5. prowler...................30003.............$415.00
6. plant protection......30004/3005....$399.95

Installation Kits:
1. 92BLKL98................30024............$59.95
2. 91L98Z28................30024............$59.95
3. transform................30024.............$59.95
4. prowler....................30024............$59.95

Misc.:
1. 91L98Z28................30102............$19.95
2. 92BLKL98................30102............$19.95

 

Luckily I have the engine out of the car.

Steve I need these headers.

How much I owe you with shipping.

I contacted via fax an email.

PROWLER
LARRY

 

Steve just e-mailed me with all the info we need. Give 20 mins. to post, I have to finish some other work first. Thx.

B

 

Can you just order the installation kit and catalyst adaptor?
I already have headers from an earlier group purchase.

 

Yes, I'm sure you can. 91L98Z28 has the final tally of all the stuff we're getting so make sure it's on there. Steve sent me these instructions when we're ready...

Please post this ordering information.

Go to:

http://www.spohn.net/index.cfm?fusea...duct&productid
=88

and place your order. Enter part number(s) and put SLP-GP-3

Steve


I'm not sure how payment will be worked out. I assume we'll get that info when me make the order.
Does anyone know if they are being shipped to SoCal, I'd rather pick them up than pay for shipping, unless it's going to cost less than gas would.

 

Could you please repost directions on how to order this at Steve's site? I just tried and the link doesn't seem to work.

AspiringGearhead: regarding your pm, YES, I am still in the GP. everyone else please check in!!!

 

CDN_87IROC:
please get your part numbers to us ASAP.
get them from www.slponline.com

 

You have to cut and paste into your browser (the '=88' is not included in the website address otherwise) to get to the site, the problem is once you get there, there is no place to enter PN#'s. I'm going to try e-mailing them to him and see what happens.

B

 

I'll wait a couple hours to see if CDN 87IROC is going to reply, if not we'll go ahead with out him.

B

 

I did hear from Steve today.

If your on the GP-3 "GROUP PURCHASE-3"

Goto this link enter your part numbers and submit your order.


http://www.spohn.net/index.cfm?fusea...t&productid=88

comment this as SLP-GP-3

 

That's the link we were looking for, knew there wa somethin up with the other one. So do we have to tell eveyone who ordered to do this or does everybody get e-mail notification when we post?

B

 

I am looking at installation kit 30022 and catalyst adaptor 30028

 

That should be 30038 ... I will sort it out with Steve. I think I could get this part from a local muffler shop if needed.

 

are we supposed to enter part numbers into the "comments" box? I don't see anywhere to enter part numbers?

 

how much is S&H and how long will it take to get the goods.

 

Here is a quote from Steve Spohn:

 

I still don't see a final GP price without shipping. Im sure this is important to others besides me.

 

plant protection:

pricing is at the top of this thread and is as follows:

Non-Coated:

30000 $415.00
30002 $415.00
30004 $385.00
30016 $345.00

30001 $415.00
30003 $415.00
30005 $385.00
30014 $385.00

Headers Available Coated:

30000C $595.00
30001C $595.00
30005C $515.00

Installation Kits:

30018: $99.95 - $89.95
30022: $69.95 - $63.95
30024: $59.95 - $53.95
30028: $32.95 - $29.50

 

Is this GP over or can we still get in on it??

 

At the moment it is still open.

 

OK, guys I sent Steve my info today who else is in.

 

I just put my order in with steve.

For anyone who has not done so already, here is the specific directions:

(1) go to this URL:

http://www.spohn.net/index.cfm?fusea...t&productid=88

(2) click "add to cart"

(3) click "checkout"

(4) fill in the "billing information" and "shipping information". Only fill out "shipping information" if it's different from your "billing information".

(5) in "other information" select the appropriate car year and model, and the ship to address type

(6) in COMMENTS, put SLP-GP-3 on the first line, and then on each extra line, put each SLP part number you are interested in. FOR EXAMPLE, my comments box is:

SLP-GP-3
30002 1 5/8 2-cat W/AIR
30024 2-cat install kit
30102 special socket

(7) click on PROCEED

(8) enter your CC information (no, you don't get to see an example of my CC information!)

(9) click ORDER

(10) wait for your SLP headers and pester anyone who hasn't already ordered

 

OK, Quoting 91L98Z28 "I'm pestering you guys" I want my headers.

 

Who's ordered so far? Who hasn't ordered so far?
Beuller? Beuller? Beuller? ............

 

Man, I'm glad I didn't wait for the GP.. it's been two months!

 

i placed my order wednesday, everyone else should order rightnow! so i can get these headers soon =P

 

Headers:
1. 92BLKL98...............30003.............$415.00 ORDERED
2. AspiringGearhead...30005.............$385.00 ???????
3. 91L98Z28...............30002.............$415.00 ORDERED
4. transform................30002.............$415.00 ORDERED
5. prowler...................30003.............$415.00 ???????
6. plant protection......30004/3005....$399.95 ???????

 

Come on guys belly up to the bar, let's get this going.

 

Sorry to bail on the GP, but the price cut isn't worth getting them now.

 

looks like we need one person to step in and save $100 on headers.

1. 92BLKL98...............30003.............$415.00 ORDERED
2. AspiringGearhead...30005.............$385.00 ???????
3. 91L98Z28...............30002.............$415.00 ORDERED
4. transform................30002.............$415.00 ORDERED
5. prowler...................30003.............$415.00 ???????
6. plant protection......BAILED NEED REPLACEMENT

 

I don't know what to say but $100.00 is a worthwhile savings unless you are not serious about the best headers you can buy for an f body that doesn't need a hack shop to install.

 

I must be confused. Normal price for my 30005 SLP headers is 399+40shipping to total $440. GP price is $385+25shipping to total to $410. 30bucks and 100 is a big difference. Where am I going wrong?

 

Yeah, I see what you mean but on the dual cat set up it does come to right at 100.00. From what I understand SLP charges more for S&H though. I wonder why the difference in discount. If this thing doesn't get off the ground within the next two weeks F-it I'm gonna talk to Summit. I need headers bad Engineered Performance Inc. F'ed up my exhaust system so bad with the Random Tech. cat installation, the tailpipes are off center the "y" pipe is 2" to the left causing it to contact my d/s loop and the system rattles. I won't be going back to them soon, nor do I recommend them. I'm gonna do it myself and get it right. Seems you can't pay good money to anyone for good work, they screw ya at every chance. The one thing is though if you want SLP headers the gp is still the way to go you still are saving something.

 

I just saw prowler's post here and he's out.

92BLKL98 also needs his headers and will be out if we can't get this thing off the ground in the next week or so.

Those of you who are left, do you want to wait this out or pull the plug?

1. 92BLKL98...............30003.............$415.00 ORDERED
2. AspiringGearhead...30005.............$385.00 ???????
3. 91L98Z28...............30002.............$415.00 ORDERED
4. transform................30002.............$415.00 ORDERED
5. prowler...................BAILED NEED REPLACEMENT
6. plant protection......BAILED NEED REPLACEMENT

 

I know you guys are gonna hate me for this but I gonna have to bail on this GP. Sorry to do this to you guys, just learned I have another two weeks with my current job, and than it's un-employment time. Woohoo. Damn internet companies and the bankruptcy stuff. Sorry again, hope you guys can find some replacements.

Ben

 

I dunno about that! Mine sure didn't go in without a fight.

 

Just an FYI, I have 4 orders, 2 more needed.

Steve

 

Hey guys come on let's get this going. For the most of us it's not a bad deal, even if the discount isn't much for some SLP headers aren't going to get much cheaper. If you're going to buy them anyway this is as good as any for getting them.

 

who was the fourth order??

 

What are the savings on this GP, I may be interested. I'm looking at headers 1 3/4 for an 87 350 TPI.


Thanks

 

Dual cat or single cat, with or with out AIR go to the www.slponline.com site and you can see which headers you need check their prices and compare to prices previously posted on this topic. If you plan to get SLP headers you may as well save something if you can. Some thumb their noses at 25 - 40 bucks when others are getting 75 - 80 bucks because of different option prices and so on but, if you want them money saved is money in your pocket. This GP should have been over by now there have been ~ 10 - 15 people who could have saved something but for whatever reason dropped out. I'm not flaming anyone, I don't know what financial reasons or otherwise some have dropped out but, guys if all your doing is wishful thinking don't bother. I'm not trying to speak for anyone but the rest of us who have antied up would like for it to move along.

Peace guys...

 

Do you really need this expensive isntallation kit?,

 

No but you will end up putting the kit togather piece by piece, needing gaskets, bolts, various hardware and so forth the kit includes fire sleeves which may not be used by many but I have a set on my Blazer with headers and my Jacobs wires are perfect. These alone are 15.00 in the Summit catalog. So yeah 59.00 isn't too bad, although they should be with the headers as expensive as they are.

 

Come on people...isn't there anyone else out there who wants some SLP headers?

I want to have headers before I turn 90... This GP is already two months old and hasn't closed yet.

So, here's the deal. If spohn gets his new subframe connectors done before this GP gets completed, then i'm out of the GP and going to buy myself some subframe connectors instead, maybe some LCA's or a torque arm too.

So if you're out there sitting on the fence, order your darn headers. We only need two people.

 

How can I order them?, I called SPOHN and no response. I also need some suspension parts.

 

primo,
here is the directions on how to order under the group purchase. Let us know when you get them ordered or if you need more help, so that someone can help out.

(1) go to this URL:

http://www.spohn.net/index.cfm?fusea...t&productid=88

(2) click "add to cart"

(3) click "checkout"

(4) fill in the "billing information" and "shipping information". Only fill out "shipping information" if it's different from your "billing information".

(5) in "other information" select the appropriate car year and model, and the ship to address type

(6) in COMMENTS, put SLP-GP-3 on the first line, and then on each extra line, put each SLP part number you are interested in. FOR EXAMPLE, my comments box is:

SLP-GP-3
30002 1 5/8 2-cat W/AIR
30024 2-cat install kit
30102 special socket

(7) click on PROCEED

(8) enter your CC information (no, you don't get to see an example of my CC information!)

(9) click ORDER

(10) wait for your SLP headers and pester anyone who hasn't already ordered

And for anyone who is keeping track:

1. 92BLKL98...............30003.............$415.00 ORDERED
2. unknown anonymous order per steve
3. 91L98Z28...............30002.............$415.00 ORDERED
4. transform................30002.............$415.00 ORDERED
5. primo......................
6. ONE EMPTY SLOT!!!!

 

Guys this is unreal that it's taken so long for this group purchase to go through. If we can't make it work by next Friday the 31st I'm going to have to order through Summit. I need to do repairs in a f...ed up exhaust system installed by a shop in my area and I'd like to go ahead with it ASAP. Two months on this gp is way too long.

 

Hey Guys,
I just placed my order for SLP Headers; I hope we can get this done quickly.

 

1. 92BLKL98...............30003.............$415.00 ORDERED
2. anonymous order per steve ...................... ORDERED
3. 91L98Z28...............30002.............$415.00 ORDERED
4. transform................30002.............$415.00 ORDERED
5. primo..................... ................................ORDERED
6. ONE EMPTY SLOT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

I have 5 orders, only need one more.

Steve