Parting black on black t top 89 GTA
#1
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Parting black on black t top 89 GTA
everything goes.
Modified HSR to fit UNDER a stock flat hood w/24Lb injectors S/S braid fuel lines adjustable fuel pressure regulator.
I am not going to list every little thing this is a complete part out.
short list...
hooker 2055's with welded closed air tubes ceramic painted
mangnaflow exhaust
sway bars
wonder bar
quick ratio steering box
12" rear PBR disks
9 bolt GM rear
black door panels
t tops
the dash pad is in ok shape, just one corner has damage
front drivers side black seat belt
tail lights
operational headlight motors (both rebuilt)
good headlight control module
gold lace wheels
good front nose cover
all the switches work
good fog lights.
If you want pics let me know
I will be putting requested pics HERE
Modified HSR to fit UNDER a stock flat hood w/24Lb injectors S/S braid fuel lines adjustable fuel pressure regulator.
I am not going to list every little thing this is a complete part out.
short list...
hooker 2055's with welded closed air tubes ceramic painted
mangnaflow exhaust
sway bars
wonder bar
quick ratio steering box
12" rear PBR disks
9 bolt GM rear
black door panels
t tops
the dash pad is in ok shape, just one corner has damage
front drivers side black seat belt
tail lights
operational headlight motors (both rebuilt)
good headlight control module
gold lace wheels
good front nose cover
all the switches work
good fog lights.
If you want pics let me know
I will be putting requested pics HERE
Last edited by V6sucker; 07-06-2006 at 11:44 AM.
#6
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by Mr. TurboTA
I posted in the other section,
But what condition are the Diamond Spoke 16 inch wheels in?
How much for them?
Thanks,
George
But what condition are the Diamond Spoke 16 inch wheels in?
How much for them?
Thanks,
George
I would like around 3-350+S&H
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by lab97z
HOW MUCH FOR THE EXHAUST-
#10
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by OneManArmy
emblems?
but 50 shipped works.
I thought the clear covering had small cracks but it just the way the bird is painted. If you want pics I will send to you.
Last edited by V6sucker; 07-06-2006 at 11:37 AM.
#12
Member
Join Date: Jul 2000
Location: Buffalo, New York, USA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Pics of the front nose cone to twiceroadsfool@yahoo.com please. Price too, shipping to 13215.
#14
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by InspectorG
powerbuldge hood???
----------
Originally Posted by yjischoking
is the steering box teeth good? does it work perfect? how much to 27603?
Last edited by V6sucker; 07-06-2006 at 10:29 AM. Reason: Automerged Doublepost
#15
Junior Member
Join Date: Jun 2006
Location: so. indiana
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 firebird
Engine: 305 ci. 4 bbl.
Transmission: 700r4
Axle/Gears: one wheel peel
will the steering box work on my 85??? if so how much shipped to 47591? whats your location maybe i could pick up. is flat hood in good cond.???
#17
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by 85blkburd
will the steering box work on my 85??? if so how much shipped to 47591? whats your location maybe i could pick up. is flat hood in good cond.???
the hood is really not worth anything.
as far as the steering box interchange I do not know for certain so I will not guess.
#19
Junior Member
Join Date: Jun 2005
Location: central, lNJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991formula firebird, 97z28
Engine: 305tbi stock-lt1 350
Originally Posted by V6sucker
I will do 325 shipped including a 3" cat delete pipe
#20
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by lab97z
IS THAT INCLUDING THE HEADERS ALSO OR JUST THE PIPES AND MUFFLERS?
The headers, which include the Y pipe and cat delete pipe are also 325 shipped.
#22
i bought my 89 iroc-z for $250.00 with a toasted motor So now it is a 340 stroker with 10.5 compression pistons aluminum heads with 2.05 1.60 valves cam is 530/550 lift double timing chain and gear set warlock exhaust system rebuilt 5 speed trans with stage 3 clutch kit new roller cam and lifters aluminum blue rockers crane pushrods. 245 /50/16 fierce tires.
#23
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by 89Iroc-ZTPI
what kind of intake i need a new one with fuel rails and plenium call 248-413-9298
The holley will include everything but the Throttle body. It will also come with -6 S/S Braid lines to go to the factory hard lines on the frame rail.
This intake let my 383 stroker burn tires to about 40MPH in a 700R. I am asking 600 shipped for it.
#24
Supreme Member
iTrader: (6)
Join Date: Apr 2005
Location: CT
Posts: 1,459
Likes: 0
Received 1 Like
on
1 Post
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
headers, y pipe, steering box, front sway bar still mine for friday? im very serious and not yanking your chain.
y pipe coated or rusty?
headers coated or painted?
size of front sway bar?
y pipe coated or rusty?
headers coated or painted?
size of front sway bar?
#25
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by vipershark11
headers, y pipe, steering box, front sway bar still mine for friday? im very serious and not yanking your chain.
y pipe coated or rusty?
headers coated or painted?
size of front sway bar?
y pipe coated or rusty?
headers coated or painted?
size of front sway bar?
the headers are painted with high temp ceramic
the y is somewhat pained, but not rusty. a good sanding and a paint would be recommended, just for longevity.
the front sway is 36mm
Last edited by V6sucker; 07-18-2006 at 10:58 AM.
#27
Junior Member
Join Date: Apr 2006
Location: Dallas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 TA / 94 Jeep Cherokee
Engine: 327 block with 350 heads.
Transmission: 4 Speed Saginaw
Axle/Gears: 3.73
Interested in the full set of GFX front and rear bumper cover. Can you email pics to liljoe1971@sbcglobal.net
ship to 75228
ship to 75228
#29
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by smccrillis
Do you have an areowing spoiler in good shape, if so how much would you want for it? And can you ship it?
Thanks,
Steve
Thanks,
Steve
70 shipped
----------
Originally Posted by V13TA
Interested in the full set of GFX front and rear bumper cover. Can you email pics to liljoe1971@sbcglobal.net
ship to 75228
ship to 75228
The only section of GFX that are damaged is the drivers body.
Everything else shipped will be in the 300 range because of size.
----------
Originally Posted by RGV 89 GTA
Is the t-top bar panel in good condition? If so how much.
45 shipped
Last edited by V6sucker; 07-14-2006 at 12:01 AM. Reason: Automerged Doublepost
#30
Junior Member
Join Date: May 2006
Location: Ohio
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans Am
Engine: 305 TBI
can you send me pics of the door panels and how much wouild you take for it
----------
my fault my email is youngmiguel@tmail.com
----------
my fault my email is youngmiguel@tmail.com
Last edited by youngmiguel; 07-17-2006 at 12:13 PM. Reason: Automerged Doublepost
#31
Supreme Member
Thread Starter
Join Date: Feb 2003
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Car: a car being parted out
Engine: blown up
Transmission: in peices
Originally Posted by youngmiguel
can you send me pics of the door panels and how much wouild you take for it
----------
my fault my email is youngmiguel@tmail.com
----------
my fault my email is youngmiguel@tmail.com
#34
Member
iTrader: (12)
Join Date: Jun 2006
Location: Albany, GA
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2008 F350 SuperDuty & few F-Bodies
Engine: Twin Turbo 6.4L Power Stroke
Transmission: Yeah, it has one.
Axle/Gears: Yeah, some of those too.
Will you sell the rear brakes seperate from the rear end? If so how much for the calipers, rotors, lines and ebrake cables?
Also how much for the wonder bar ans dual fan set up?
Also how much for the wonder bar ans dual fan set up?
Last edited by 97ramsst; 07-24-2006 at 10:41 PM.
#36
Member
Join Date: Apr 2006
Location: chicago, il
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC-Z T-top C&C
Engine: 350
does it have the vat key setup? if so can you send me the whole thing, key, lock cylinder and the box which is located on the steering column. let me know how much thanks.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
0
08-05-2015 07:57 PM