custom meth injection system/aux nitrous fuel tank fab
Thread Starter
Supreme Member
iTrader: (3)
Joined: Dec 2005
Posts: 2,472
Likes: 0
From: Sayreville NJ
custom meth injection system/aux nitrous fuel tank fab
hers some shots of a 1/2 gallon tank i made for a diy meth injection system.
its an all aluminum tank.mounted inside the tank on a removable hanger/flange is a hi press walborow intank pump. this could be used for a diy meth injection,and or as an aux tank/pump for a wet nitrous system.
were the pump is mounted there will be an -6 an fitting ontop of the tank for the pressure line,and another on the top side of the tank for a return line.
in the one pic u can see the bulkhead electrical conectors ill be using to get the power to the pump.
PS THE ZIP TIES ARE JUST TEMPORARY TILL I GET THE ACTUAL PUMP MOUNT FINISHED
the round flange thats ontop of the pump hanger gets drilled and taped so it can be bolted down to the top of the tank with a gasket so it dosent leak
its an all aluminum tank.mounted inside the tank on a removable hanger/flange is a hi press walborow intank pump. this could be used for a diy meth injection,and or as an aux tank/pump for a wet nitrous system.
were the pump is mounted there will be an -6 an fitting ontop of the tank for the pressure line,and another on the top side of the tank for a return line.
in the one pic u can see the bulkhead electrical conectors ill be using to get the power to the pump.
PS THE ZIP TIES ARE JUST TEMPORARY TILL I GET THE ACTUAL PUMP MOUNT FINISHED
the round flange thats ontop of the pump hanger gets drilled and taped so it can be bolted down to the top of the tank with a gasket so it dosent leak
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
