Axle Splines
Thread Starter
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Axle Splines
Q: What axles are in my car?
A: 82-88 thirdgens have 26 spine axles. 89-92 cars have 28 spline axles, same as the 4th gen. 89 was a transition year. Some cars have 26, some cars have 28. The only way to know for sure is to open it up and check.
------------------
1991 Camaro Z28
5.7L 5-Speed
13.32 @ 105.27 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
Webmaster: ICON Motorsports
A: 82-88 thirdgens have 26 spine axles. 89-92 cars have 28 spline axles, same as the 4th gen. 89 was a transition year. Some cars have 26, some cars have 28. The only way to know for sure is to open it up and check.
------------------
1991 Camaro Z28
5.7L 5-Speed
13.32 @ 105.27 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
Webmaster: ICON Motorsports
Yes, the thirdgen axles are narrower (like chuck said), but the spline count and axle shaft diameter are the same--which means you can use fourth gen ring gear carriers, if you have the third-gen 28 spline axles.
28 spline axles can also be purchased from Moser Engineering (http://www.moserengineering.com/)
28 spline axles can also be purchased from Moser Engineering (http://www.moserengineering.com/)
Thread
Thread Starter
Forum
Replies
Last Post









