Door hinge repair kit Group Purchase
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Door hinge repair kit Group Purchase
I've opened up two Group Purchases for the upper hinge repair kits I sell. The GP's will run two weeks, until June 9th. If you plan to repair your sagging doors in the near future, this is your opportunity to get the kits at a reduced price. Be sure to order under part number 200370-GP or 201370-GP to get the special GP pricing.
Lon Salgren
Top-Down Solutions
Lon Salgren
Top-Down Solutions
Last edited by lonsal; May 26, 2005 at 11:09 PM.
Member

Joined: Jan 2002
Posts: 459
Likes: 0
From: Bakersfield, under a ton of dust...
Car: A few
Engine: All Eights
Transmission: All kinds
Are we talking the $212 set for all four? My hinges seem fine at 145K but the doors are coming off for the restoration anyway. Dear G0d, I would hate to finish the car and have the sag start a month later...
K
K
Trending Topics
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Anyone besides me find it humerous that the post lingered without any interest for nearly a full year before being brought back from the dead? Sure I'll open up the GP's on the hinge kits again. The GP's run until 6/4/06. I'll place the order for all the hinges on 6/5. Be sure to order under the GP numbers to get the special pricing.
Lon Salgren
Top-Down Solutions
Lon Salgren
Top-Down Solutions
Joined: Jun 2005
Posts: 217
Likes: 0
From: Santa Clarita, California
Car: 1990 RS/2000 Z28
Engine: 5.0/5.7
Transmission: 4L60/4L60E
Axle/Gears: 10 bolt/3.23
TDS
Thought you were ignoring us. Thanks I/we appreciate it!
You wouldn't happen to be willing to have a GP on the Deluxe Door Hinge Repair Kit now would you?
You wouldn't happen to be willing to have a GP on the Deluxe Door Hinge Repair Kit now would you?
Last edited by ABJ88; May 23, 2006 at 01:51 AM.
Member

Joined: Jan 2002
Posts: 459
Likes: 0
From: Bakersfield, under a ton of dust...
Car: A few
Engine: All Eights
Transmission: All kinds
Originally Posted by lonsal
Anyone besides me find it humerous that the post lingered without any interest for nearly a full year before being brought back from the dead? Sure I'll open up the GP's on the hinge kits again. The GP's run until 6/4/06. I'll place the order for all the hinges on 6/5. Be sure to order under the GP numbers to get the special pricing.
Lon Salgren
Top-Down Solutions
Lon Salgren
Top-Down Solutions

...heading to TDS for the skinny.... btw
K
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
Originally Posted by theboilermaker
o crap, I just bought last night...
Thanks, Lon
Member
Joined: Feb 2005
Posts: 156
Likes: 0
From: Fort Wayne, Indiana
Car: 87 camaro sc
Engine: 357 w/ cc qjet
Transmission: 700 r4
well I guess there is an upside, since I want the car in paint by the 12th and I am puling the doors this weekend. Thanks for the gp anyways
Member
Joined: Jun 2001
Posts: 338
Likes: 0
From: NYC
Car: 1991 Formula
Engine: 5.0 TPI
Transmission: T-5
Originally Posted by theboilermaker
o crap, I just bought last night...
I guess the upside to this is that when I woke up and checked my mail today, I had a package from TDS and for that I say thank you Lon!
Now all I have to do is convince my wife that spending a beautiful day working on the car is not a waste
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
I find it odd that several members have posted an interest in my opening this GP for the hinge repair kits yet so far no one has ordered them. The Group Purchase closes on 6/4. To be included in the GP you need to order them online through the Group Purchases that are on my web site. You can add items such as the GM door spring tool or Pistol-Grip mini grease gun on the same order. All the items will ship together. If paying by credit card, your card won't be billed until it is ready to ship. I'd hate to have anyone miss out on this GP beacuse they mistakenly thought that posting their intentions to buy the kit on this thread meant they had placed an order for it. Only those that purchase the kits through the Group Purchase on my web site or mention it when placing an order by phone will be included in the GP.
Lon Salgren
Lon Salgren
Member

Joined: Jan 2002
Posts: 459
Likes: 0
From: Bakersfield, under a ton of dust...
Car: A few
Engine: All Eights
Transmission: All kinds
Lon: No misunderstandings here. I knew I have to go to the site, but I think I'll be rebuilding all four hinges so the larger kit is what I'll need, GP or no. No sweat though, as it's worth the price regardless of GPs. Thanks for offering it for those who can use it 
K

K
Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
Is this still going on Lon?
I see you have the GP link on the website still.
I read we don't pay until ships, so how close to being shipped if I ordered?
Anybody else need these??
I see you have the GP link on the website still.
I read we don't pay until ships, so how close to being shipped if I ordered?
Anybody else need these??
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
The GP is open and about halfway filled to date.
Lon
Lon
Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
Member
iTrader: (4)
Joined: Dec 2005
Posts: 207
Likes: 0
From: Bay Area, CA
Car: 1984 Camaro Z28
Engine: Roller 350
Transmission: T-5
Axle/Gears: built ten bolt 3.73's
D*mmit. Just when I figured I could stop spending money on my dang car I see this. And yes my doors sag. So If I read this right I should order two kits to repair both doors and maybe the lower hinge pins as well to fully restore the doors? Gah...
-SmallTires
-SmallTires
Last edited by SmallTires; Jul 24, 2006 at 11:14 PM.
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
The upper hinge repair kit includes the lower hinge pins and bushings.
Lon
Lon
Senior Member
iTrader: (3)
Joined: Jan 2004
Posts: 684
Likes: 0
From: K.C. Mo.
Car: '89 GTA 9,000 MILES
Engine: 350
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
These hinge pins and bushings getting hard to find ? I have done several over the years and just got them at any parts store ? Never had a bushing wear out with any less than 150k.....just curious ?
Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
Kit Contents: (2) Shouldered machined 4041 steel pins, (2) Machined Phosphor Bronze flanged bushings, (2) Aerospace 12 point high tensile nuts, 0.5ml packet of Loctite 271 bearing retaining adhesive, 6" strip of special abrasive, lower hinge pin and bushings, instructions
Top-DownSolutions.com
Sign up quick!
Top-DownSolutions.com
Sign up quick!
Supreme Member
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
my doors sag badly i dont like it
i try to connect to the site but its givin me a hard time.
Can someone post pics of the included parts for this, i am very interested.
I know the bottom there is a pin with 2 bushing, and the top i THINK is a big bracket type deal kind like a squared "C" i think.
i try to connect to the site but its givin me a hard time.
Can someone post pics of the included parts for this, i am very interested.
I know the bottom there is a pin with 2 bushing, and the top i THINK is a big bracket type deal kind like a squared "C" i think.
Joined: May 2001
Posts: 5,244
Likes: 14
From: Sac, CA
Car: '89 GTA
Axle/Gears: 3.27/9-bolt
my doors sag badly i dont like it
Here's a pic off the site just for you.
Now go sign up ASAP.
Supreme Member
Joined: Jul 2005
Posts: 1,423
Likes: 1
From: Miramichi, NB
Car: 86 Monte Carlo
Engine: Blown 489
Transmission: TH400
Axle/Gears: 9" 370s
so my top hinge will be fine, i just replace the bolts that hold it?
p.s. it looks like this setup is for one door, is this going to come with enough for both doors?
answer this and i will order.
p.s. it looks like this setup is for one door, is this going to come with enough for both doors?
answer this and i will order.
Thread Starter
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
We've reached our GP minimum as of today. Thank you all for your patience. I'm holding the Group Purchase open over the weekend for anyone else that is on the fence about ordering. The GP will be ordered Monday. All orders must be placed by Sunday to be included in the Group Purchase. Posting on this thread of your wish to be include in the GP doesn't get you the Group Purchase price. You have to call and mention the Group Purchase when ordering or order online under the Group Purchase category. Everone will be informed when their order has shipped.
Thanks, Lon
Thanks, Lon
Member
iTrader: (4)
Joined: Dec 2005
Posts: 207
Likes: 0
From: Bay Area, CA
Car: 1984 Camaro Z28
Engine: Roller 350
Transmission: T-5
Axle/Gears: built ten bolt 3.73's
Received mine today! Looks great. Thanks for the hook up! Plus now I get to rock my TDS pen tomorrow at work that was packaged in there as well!
-Jon
-Jon
Darn why didn't I see this when it was going on!!
I always miss these things, I was doing a search on here to get the URL to your website so I can order a kit and found this thread. I knew I should have fixed this door last summer!!
I always miss these things, I was doing a search on here to get the URL to your website so I can order a kit and found this thread. I knew I should have fixed this door last summer!!
Member

Joined: Jan 2002
Posts: 459
Likes: 0
From: Bakersfield, under a ton of dust...
Car: A few
Engine: All Eights
Transmission: All kinds
Member
iTrader: (1)
Joined: Nov 2005
Posts: 179
Likes: 0
From: East Bay Area
Car: 1984 Z28
Engine: L31
Transmission: WC T5
Axle/Gears: 10 bolt 3.73
Im in if this gets started up again. The door clunking form the worn hinges is driving me insane every time i hit a bump.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM










