Just got done with my door panels. the original fabric was ripped on the ends and the pockets looked like s&^*. so instead of paying 100+ for new ones i decided to make my own. the hardest part was cutting out the letters.lmk what ya think

 

few more pics

 

Nice work. What adhesive did you use?

 

It was a gallon of green spray glue shot out of a spray gun. my buddy got his own custom shop so i just rob him for materials and a little help. Im not sure the exact brand of glue though. the plywood ws6 emblem was glued to the backer with a can of regular spray adhesive.

 

awsome!!!! the more that i see the deluxe panels redone the more i think that i am going to have to do this my self and give up on trying to find new ones. but really they look great. good thing that i have a practice set for sixing and fit

 

how exactly do you do that? i saw something similar on G&T fiberglass's site and i kinda liked it and was thinking about copying it....

 

more than likely those flames are cut out of 1/4 foam, laid on top of an 1/8 ply panel cut to fit and then its all adhered together wrapped in what ever vinyl,suede, synthetic, and then adhered to the door. Or if there really good its done out of fiberglass over the original foam and then wrapped by a pro.

 

is there a good how-to thread on here for this mod?

 

i have looked and i think just by asking the guys who have do it. that is how am i going to learn. by looking at this thread and doing it myself.

 

maybe wanab03ss or someone else who knows how to do this should make us 'less experienced' people a how-to thread or maybe a sticky.......

 

vote for sticky for all of us with deluxe door panels!

 

I dont know how to make a sticky thread but Im willing to help out with some info to help out. when i do my passenger side ill take a bunch of step by step pics of what i do. then Ill post em .

 

i believe a moderator has to make it sticky... i for one will appreciate any and all pics you post cause i would like to find material and create a design myself.

 

even if its not made into a sticky atleast people will be able to do a search for the subject and find a nice step by step thread courtesy of wanab03ss

 

id paint the triangle trim with some satin black interior srapy.
the dulicolor stuff at advanced works great.
you will be suprised how much better it will look.
good luck!
looks good!

 

I like the WS6 door panel. Looks really good.

 

thanks for all the replies, Ive been really busy so I havent had time to finish my passenger side. As soon as I start it Ill be posting the pics. By the way about the comment on painting the plastic handle trim with duplicolor trim paint, Ive used that on plastic but nothing out of a can compares to Krylons fusion paint for plastic, that stuff is the only choice for plastic , unless you have plastic adhesion promoter and a pro spray gun with vinyl dye.