I have a very nice 92 RS with 18K. The original owner took it to the dealer for a shift cable recall and the goofy mechanic overtightened the screws holdiong on the upper trim - breaking several of the ears off. This piece of trim goes over the shifter and also goes forward as part of the ash tray and ash tray door. It looks like I can remove the stuff underneath (slider, graphics, etc). Any idea where I can get one of these? Thanks. I don;t have enuff posts for classified yet.

 

i have an extra one laying around. its for an 1982- 89 with white lettering. it does have a few cracks around the upper screw holes. and the auto od writing is rubbed off. the ashtray needs a spring. other then that ebay. i wanted one from a 92 camaro cause i like the trim design on it. and i paid 110$ for a mint condition one. there very hard to come buy

 

Hawks will have them used. Classic Industries and Year One may have them new. Other option for new is Ebay.. New auto and manual trim plates are discontinued, so hard to come by; may just have to find a good used one. Or, get a custom plate from someplace like Jimmy Jams.

 

classic industries,year one, paddock and ecklers are a no go i already tried there.

 

Jimmy Jams - can't find them. Someone should be making these parts. Sources for custom plates? Looks like you can swap the other pieces to a new plate. Thanks.

 

http://jimmy-jams.tripod.com/

or, if you don't mind veering from the stock look, just get a shifter plate like....

http://www.jegs.com/i/Hurst/530/114-...0002/-1/745789 which I will be using when I switch to a...

http://www.jegs.com/i/Hurst/530/114-...0002/-1/745789

Something likehttp://www.jegs.com/p/Trans+Dapt/984486/10002/-1/10627 would prolly work for ya using an automatic.