Interior Discussion about interior restoration, repairs, and modifications.

3rd gen 4th gen interior

Thread Tools
 
Search this Thread
 
Old Aug 22, 2008 | 09:13 AM
  #1  
timeflyere6's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 58
Likes: 0
From: bflo ny
Car: 1992 camaro rs 25th aniversery
Engine: crapy 305 tbi
Transmission: blown 700r4
Axle/Gears: stock
3rd gen 4th gen interior

ok can people send me some pics of the swap they did useing 4th gen dash and such I been thinking about doing the swap but i want to c how well it looks and sudgestions as on how to go about this.
Note as for the wiring Im swaping my 305 for an ls3 with a 4l80-e trani so i dont think im going to have much isues if i swap most of my wiring.

also one big question when you swaped your dash did you have to swap you center council too? if not I was thinking about getting a new center council from a 3rd gen as I lie how it looks
thanks for any help you can give
Reply
Old Aug 25, 2008 | 11:10 AM
  #2  
DyingYoung138's Avatar
Senior Member
 
Joined: Jun 2008
Posts: 398
Likes: 3
From: Maryville, TN
Car: '86 Trans Am
Engine: 305 H.O.
Transmission: 700r4
Re: 3rd gen 4th gen interior

Do a search around the boards. There have been quite a few guys on here do the swap and they all posted pics up somewhere. Just do a search and you should find what you need.
Reply
Old Aug 25, 2008 | 11:30 AM
  #3  
80schild's Avatar
Supreme Member
15 Year Member
iTrader: (5)
 
Joined: May 2008
Posts: 1,361
Likes: 52
From: Alabama
Car: 87 GTA
Engine: 5.7 TPI
Transmission: 700r4
Axle/Gears: 3:27 BW 9 bolt
Re: 3rd gen 4th gen interior

Wouldn't it be easier to just sell your 3rd gen and buy a 4th gen? I'm not trying to be smart here, but I just don't see the reason for all of this swapping.
Reply
Old Aug 29, 2008 | 04:30 PM
  #4  
drknow90rs_ss@y's Avatar
Supreme Member
iTrader: (3)
 
Joined: Apr 2008
Posts: 3,002
Likes: 64
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: 3rd gen 4th gen interior

I may be able to awer that, 80schild... I like the style of the thirdgen more than I like the style of the fourthgen. I'm not too crazy about the dash and center console, though. Besides, there is a certain "coolness" to being different. (And I for one, want a cupholder!!!) I put an LS1 into mu 90 rs because I wanted easy horsepower, now I have it. LOL Some people like the thirdgen dash. I have three of them. I want each to be different in its own way. I would like to know where I can find info on the dash/center console swap, as I see everyone talking about it, but never see pics or diagrams of it.
Reply
Old Aug 29, 2008 | 09:37 PM
  #5  
livewire's Avatar
Member
iTrader: (10)
 
Joined: Jun 2002
Posts: 270
Likes: 0
From: Taylors Falls, Minnesota
Car: 1983 Z/28
Engine: Edelbrock 355
Transmission: T-56
Axle/Gears: 3.42/Zexel/PBR
Re: 3rd gen 4th gen interior

Why don't you just put a 2007 Corvette dash in it? or is it because it may break in half and fall in your lap? LMAO sorry, i couldnt help it. i've thought long and hard about the 4th gen swap, but i think i've ended up liking my third gen setup. besides, the car has sentimental value to me so i don't think i could change it.
Reply
Old Aug 30, 2008 | 02:36 AM
  #6  
drknow90rs_ss@y's Avatar
Supreme Member
iTrader: (3)
 
Joined: Apr 2008
Posts: 3,002
Likes: 64
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: 3rd gen 4th gen interior

Well, livewire, I would put the 2007 dash in, but I already have a dash from a stealth bomber in there!!! I would show you pics of it but it's classified and my camera is broken!!! LOL. My 86 Iroc will probably have the stock dash in it, by the time I'm done, but I am really thinking of doing a 4thgen dash/door panels/seats in my 85 trans-am... not too sure yet, just kinda kicking the Idea around.
Reply
Old Aug 31, 2008 | 04:40 AM
  #7  
The Project's Avatar
Supreme Member
15 Year Member
iTrader: (6)
 
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: 3rd gen 4th gen interior

Originally Posted by drknow90rs_ss@y
And I for one, want a cupholder!!!
There's a tech article on the first page on how to put a cup holder in a 3rd gen...providing you don't smoke.

To make a 4th gen fit perfectly requires A LOT of work and modifying. You can get it to fit 85% percent, no problem. BUT, the other 15% takes time and patience.
Reply
Old Aug 31, 2008 | 10:58 AM
  #8  
DyingYoung138's Avatar
Senior Member
 
Joined: Jun 2008
Posts: 398
Likes: 3
From: Maryville, TN
Car: '86 Trans Am
Engine: 305 H.O.
Transmission: 700r4
Re: 3rd gen 4th gen interior

Originally Posted by The Project
There's a tech article on the first page on how to put a cup holder in a 3rd gen...providing you don't smoke.

To make a 4th gen fit perfectly requires A LOT of work and modifying. You can get it to fit 85% percent, no problem. BUT, the other 15% takes time and patience.
Even if you do smoke, you should never use the in car ash trays. lol. So in my case, even with all my friends being smokers, I'd be set because NO ONE uses the in car ash trays without getting their *** whooped lol
Reply
Old Aug 31, 2008 | 03:46 PM
  #9  
timeflyere6's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 58
Likes: 0
From: bflo ny
Car: 1992 camaro rs 25th aniversery
Engine: crapy 305 tbi
Transmission: blown 700r4
Axle/Gears: stock
Re: 3rd gen 4th gen interior

See to be honset I like orignal but I have seen some pics of the cross over and it does look nice, Beside hey it be kool for some to look into my car and be like what the....... well you know. I hate the 4th gen body style to me its a girly car the muscle like on mustangs is gone. The 4th gens went from being truely a aswome car to just a plain old sports car that is ugly..really ugly. That is why I am swaping the engine becasue of gas milage and power as for the interior im still not decided Im trying to see some finished pictures to make my final choice
Reply
Old Aug 31, 2008 | 04:42 PM
  #10  
DyingYoung138's Avatar
Senior Member
 
Joined: Jun 2008
Posts: 398
Likes: 3
From: Maryville, TN
Car: '86 Trans Am
Engine: 305 H.O.
Transmission: 700r4
Re: 3rd gen 4th gen interior

Originally Posted by timeflyere6
See to be honset I like orignal but I have seen some pics of the cross over and it does look nice, Beside hey it be kool for some to look into my car and be like what the....... well you know. I hate the 4th gen body style to me its a girly car the muscle like on mustangs is gone. The 4th gens went from being truely a aswome car to just a plain old sports car that is ugly..really ugly. That is why I am swaping the engine becasue of gas milage and power as for the interior im still not decided Im trying to see some finished pictures to make my final choice
You really can't tell me that the LS1 WS6 Ram-Air Trans Ams are not mean lookin bastards. lol.
Reply
Old Aug 31, 2008 | 04:54 PM
  #11  
Tommychu's Avatar
Junior Member
 
Joined: Oct 2007
Posts: 20
Likes: 0
Re: 3rd gen 4th gen interior

It's funny, because I was going to do that swap but then two weeks ago I said screw it 'cause I couldn't find one, and then I spent a bunch of money on new gauges and a panel for them. Now there's a 1995 TA sitting out in my local junkyard.
I got myself a really good tranny though...
Reply
Old Aug 31, 2008 | 04:57 PM
  #12  
timeflyere6's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 58
Likes: 0
From: bflo ny
Car: 1992 camaro rs 25th aniversery
Engine: crapy 305 tbi
Transmission: blown 700r4
Axle/Gears: stock
Re: 3rd gen 4th gen interior

mean they look all girly lol sorry dude they have more curves thant one of those supermodels I mean wheres the rough edge that gave camor its name they took the fire out of firbird thats what i beleave the new 5th gens are kind going back i mean even those are nicer than the 4th gen
Reply
Old Aug 31, 2008 | 06:19 PM
  #13  
ssean92's Avatar
Supreme Member
20 Year Member
iTrader: (10)
 
Joined: Sep 2002
Posts: 2,113
Likes: 0
From: Ga.
Car: sold
Re: 3rd gen 4th gen interior

I have done alot of the swaps, LT1 (383), T56, dash/ center consel, rear. I love the uniqueness of the swaps.
Reply
Old Sep 1, 2008 | 01:50 AM
  #14  
drknow90rs_ss@y's Avatar
Supreme Member
iTrader: (3)
 
Joined: Apr 2008
Posts: 3,002
Likes: 64
From: Wittman,Az
Car: 86 IROC-Z, '71 RS
Engine: 305 TPI/ 350
Transmission: 700R4/TH350
Re: 3rd gen 4th gen interior

My point exactly, ssean92!! I have three of these cars and want each to look totally different!! Plus, I can get a dash with everything I need for the swap for less than the cost of a new dashpad!!! LOL
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BumpaD82
Members Firebirds
31
Apr 4, 2019 10:36 AM
69 Six Pack
Camaros for Sale
13
Oct 5, 2015 07:51 PM
Warlocksirix
Suspension and Chassis
27
Sep 3, 2015 12:26 PM
neekolzun
Body
32
Aug 24, 2015 04:59 PM
Eagle223usa
Brakes
4
Aug 14, 2015 09:24 AM




All times are GMT -5. The time now is 04:45 AM.