Help! Loose Tooth Steering Column Repair
Thread Starter
Junior Member
Joined: Sep 2008
Posts: 27
Likes: 0
From: Solvang CA 93463
Engine: 305
Transmission: Manual
Help! Loose Tooth Steering Column Repair
Hello,
So I started to re-assemble my steering column after tightening the 4 bolts that were buried. I'm having a problem with the Key Warning Buzzer Switch and Retaining Clip (I believe pictured below). Do both of these parts go together? If so how? If not, where does that Retaining Clip go? The clip fell out with all the moving around.
Any other help,pictures,and suggestions would be greatly appreciated.
So I started to re-assemble my steering column after tightening the 4 bolts that were buried. I'm having a problem with the Key Warning Buzzer Switch and Retaining Clip (I believe pictured below). Do both of these parts go together? If so how? If not, where does that Retaining Clip go? The clip fell out with all the moving around.
Any other help,pictures,and suggestions would be greatly appreciated.
Joined: Apr 2006
Posts: 76
Likes: 1
From: Hopewell jct NY
Car: 1989 GTA
Engine: TPI 350
Transmission: 700r4
Axle/Gears: stock axle
Re: Help! Loose Tooth Steering Column Repair
I just went thru the same thing. Yes they go together. I have attached a picture of how.
Joined: Apr 2006
Posts: 76
Likes: 1
From: Hopewell jct NY
Car: 1989 GTA
Engine: TPI 350
Transmission: 700r4
Axle/Gears: stock axle
Re: Help! Loose Tooth Steering Column Repair
it is out of the shop manual for 88 z28s. I bought it off of ebay.
Thread
Thread Starter
Forum
Replies
Last Post
