Vette Seats in a 3rd Gen?
Thread Starter
Joined: Feb 2006
Posts: 1,265
Likes: 0
From: Sacramento Ca
Car: 86 Trans am, 91 Camaro RS
Engine: 355 Sbc, nothin yet
Transmission: 700r4- both
Vette Seats in a 3rd Gen?
I did a small search and didn't get anything worthwhile, so I will pose the question.. Does anyone have any generation Corvette seats in their 3rd Gen? If so can u please post a few pics. I was curious about the seat frames compatibilty with our cars and the motors still bein useable. Plus they are much more comfy then our bus seats. Thanks all.
Member
Joined: Apr 2009
Posts: 415
Likes: 0
From: Renton, WA
Car: 1988 IROC Z
Engine: 5.7 litre
Transmission: 700R4
Axle/Gears: 3.27 Posi with 4 wheel disc brakes
Re: Vette Seats in a 3rd Gen?
I have seen C5 seats installed and they look great. I know they are NOT a direct bolt it and quite a bit of modification had to be done to the frame to make it work.
Spend some time in this thread: https://www.thirdgen.org/forums/inte...se-sexy-7.html tons of great pics and on page 7 there are pics of C4 vette seats installed in a 3rd gen.
Spend some time in this thread: https://www.thirdgen.org/forums/inte...se-sexy-7.html tons of great pics and on page 7 there are pics of C4 vette seats installed in a 3rd gen.
Last edited by IROC#1; Nov 23, 2010 at 02:10 PM.
Thread Starter
Joined: Feb 2006
Posts: 1,265
Likes: 0
From: Sacramento Ca
Car: 86 Trans am, 91 Camaro RS
Engine: 355 Sbc, nothin yet
Transmission: 700r4- both
Re: Vette Seats in a 3rd Gen?
I have seen C5 seats installed and they look great. I know they are NOT a direct bolt it and quite a bit of modification had to be done to the frame to make it work.
Spend some time in this thread: https://www.thirdgen.org/forums/inte...se-sexy-7.html tons of great pics and on page 7 there are pics of C4 vette seats installed in a 3rd gen.
Spend some time in this thread: https://www.thirdgen.org/forums/inte...se-sexy-7.html tons of great pics and on page 7 there are pics of C4 vette seats installed in a 3rd gen.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
