This may be a stretch, but does anyone know of a vendor that sells all the hardware needed to re-install a thirdgen camaro interior? When I bought my car I got all the interior BUT it was all in a box... And the PO didn't feel the need to find me the hardware. I couldn't come up with much on a search. Any help would be greatly appreciated!

 

Ebay carries most hardware, there was a thread on here not long ago that had all the parts numbers. What parts are we talking about? I might be able to get some parts numbers for you.

 

Camaro central.com sells interior screw kits.

 

I'm needing absolutley every nut and bolt that holds a 87 camaro's interior together lol. I did a search through the forum but i didn't run across anything with part numbers. I was hoping there was a complete kit or something I just hadn't discovered yet.

 

Just checked out Camaro Central's kit. Thanks for the recomendation Mikeo91. Looks like they sell a pretty nice kit.

 

This may be helpful to you. http://www.filedropper.com/fbodycd

Download the file, extract to your harddrive somewhere, and then open 'index.html' in your browser. Click into the "Interior Trim" section. It has assembly instructions with pictures and part numbers for just about anything you could ask for. This is for Firebirds, but interior is pretty much model agnostic. Good Luck!

 

i would go to a junkyard and find one and tear it all apart marking what goes where, clean it all up then install in yours

 

AutoZone and PepBoys sell almost all the plastic screws, interior screws, clips, etc. in the Help and Fasteners section.

I bought all my door panel clips, black plastic screws, and panel push clips there.

-cal30sniper

 

I thought about going the junkyard route and pulling all of it out, but I'd rather skip the work and go all new. I knew the fasteners in parts stores would have some of it. I was just hoping I could get a full kit, rather than having to make multiple trips to and from etc etc

 

Downloads as a 0byte file? Any chance you can forward the file?

I'm in the same boat as the OP, would love to have part numbers etc

 

Sorry about that. Here's a mirror on a different host.
http://www.mediafire.com/?t560c5w6b5b5yxf

 

Sweet! thanks