Steering column/ turn signal stick help!
Thread Starter
Supreme Member
Joined: Aug 2011
Posts: 1,178
Likes: 1
From: Aloha, Oregon
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
Steering column/ turn signal stick help!
Recently I had my steering wheel off and I bumped the stick with my head because I was crawling underneath the dash. Well, now the left flasher stays solid on the dash and the tail light, the front light doesn't even come on. Also I took the steering wheel off because it started clakkclakkclakking when I turned the wheel and shooting spark too, so my main question is how do I get the gear that locks the wheel out?
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Steering column/ turn signal stick help!
Maybe something helpful in the sticky below:
https://www.thirdgen.org/forums/susp...-steering.html
JamesC
https://www.thirdgen.org/forums/susp...-steering.html
JamesC
Thread Starter
Supreme Member
Joined: Aug 2011
Posts: 1,178
Likes: 1
From: Aloha, Oregon
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
Re: Steering column/ turn signal stick help!
That helps quite a bit, thanks James!
Thread Starter
Supreme Member
Joined: Aug 2011
Posts: 1,178
Likes: 1
From: Aloha, Oregon
Car: 1991 Christine Z28
Engine: RV Cam and Intake 350 SBC
Transmission: 5speed
Axle/Gears: 3.08 ls Posi
Re: Steering column/ turn signal stick help!
Well, the metal piece that goes in between the 2 contacts for the blinkers somehow came loose and the wheel lock gear grabbed it, mangled it, and made it shoot sparks. It looks like it is just held in by some type of glue, I'm not surprised that the glue melted as hot as that area under the dash gets from engine heat.
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
Mar 18, 2019 08:29 PM








