verified that my alternator is not putting out..i was wondering if anybody has a wiring diagram for a 98 camaro alternator or anything that could help..i have the big black wire goin form the alternator back to the battery and the signal wire is hooked up...question...is the signal wire a positive wire, or is it grounded through the computer?? I looked thru the stickies but couldnt find anything..thanks guys

 

98's do not use the PCM to control the alt. Just a dummy light. For a swap, you must either use a light or resistor to know the voltage down on the signal wire to prevent the alt from burning up

http://www.ls1tech.com/forums/conver...aq-thread.html

See if you're getting any voltage on the alt connector with the IGN on. If you are and it's less than 12v then have the alt tested at a parts store. If its 12v or higher, add a light or resistor inline. The alt most likely will be burned up

No voltage on the wire means its not connected properly. Recheck your wiring