I just cannot find it anywhere! What is the part number for the LS1 F body accessory drive kit?

You can find all the part numbers in the .zip file attached in the very first post.

https://www.thirdgen.org/forums/ltx-...ula-vin-h.html

Thanks. I didn't have any trouble finding individual part numbers. I want the part number for the whole kit. All I can find is LS2 & LS3 accessory drive kits.

Yes, a kit like that. Now what's the GM part number so I can find it cheaper?

Call a dealership or call/send an e-mail to gm performance parts? C'mon now.

here is a post on ls1tech with a lot of part numbers.

http://ls1tech.com/forums/conversion...oem-parts.html

I did, smarty pants.

I thought maybe it could be GM p/n 19155066, but I found a thread with somebody that tried and he had to return it because it did not fit in a 3rd gen.

And you're still looking for the answer What did they conclude?

Edit-That PN suggests its the CTS-V accessory drive

There is no such kit. Some of the stuff has been discontinued. No, actually, all of it has, but some of it, they've sold all the leftovers too.

Pretty much what I figured. The GTO accessory drive is very similar to the f-body set-up, they may have one of those available..

Whats the reasoning everybody wants the F-Body setup? I see very few Y-Body setups. I have the Vette setup and everything fits perfect.

Darn. I was afraid it had been discontinued.

Scogging Dickey didn't have the GTO kit either. CTS-V (LS2) is the closest thing I could find and I know it doesn't fit from the other thread. Looks like us 3rd gen guys are left out now.

There's all of us here, but the '98-'02 F-car stuff is the best fit in almost every other vehicle on earth, too. Spend some time in the "Conversions and Hybrids" section of LS1tech.com, then you'll understand. These are getting swapped into literally everything. Volvos, Porsches, BMWs, Ferraris, F150s, Rams, Jeeps, Focus, Corvair, Studebaker, Nash, Miata, RX7, 300ZX, old Camaros, v6 4th gen Camaros, everything. And 99% of them need the same stuff we do.

What K-member and steering setup do you have? Can you post a picture?

Spohns K member, but the setup isnt even close to the K member area.

The Ac fits in the same area as well. All stock steering.

Well, this is great news! I can't figure out why, but for some reason I thought the Corvette FEAD didn't fit a 3rd gen. This really opens up options for me and solves problems. I like the idea of the Corvette FEAD much better because it gives me more options to find used superchargers since everything is made for a 'Vette.

Can you show a picture of the A/C compressor installed? And how did you connect the A/C lines?

More detail the better because there is very little info at this site on Corvette accessory install and pitfalls.

I dont have it installed but it fits in the stock location. Mocked it up. As for lines I emailed Hawks and they said the LSX swap lines they make will fit.

Report back when everything is in.

I talked to Nook and Tranny today (they sell parts and do swaps for people) and they told me the Corvette AC compressor will cover mounting hole for the location where motor mounts attach on F body cars. Did you do the mockup in the car? And if so, what motor mounts are you using?

I have LS1 stands and LS1 clamshells.

Is that the 19155066 kit or 10067. Neither of those kits look like yours according to the parts diagrams.