LTX and LSX Putting LT1s, LS1s, and their variants into Third Gens is becoming more popular. This board is for those who are doing and have done the swaps so they can discuss all of their technical aspects including repairs, swap info, and performance upgrades.

vorteciroc health update

Thread Tools
 
Search this Thread
 
Old Aug 19, 2023 | 07:16 AM
  #1  
QwkTrip's Avatar
Thread Starter
COTM Editor
25 Year Member
iTrader: (22)
 
Joined: Mar 2001
Posts: 10,439
Likes: 2,093
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
vorteciroc health update

Hey, folks. @vorteciroc sent me a message last night about some events related to his health and asked that I share with the forum. He also asked that I tell people with open orders for harnesses and parts to please have a bit of patience, it will get done as promised, with just a little delay. (I asked him to not worry one bit about any of us, but to take care of himself right now!)

vorteciroc is easily recognize as one of the most generous, brilliant, and soft spoken persons ever on this site. A true gentleman! Here is part of the message he sent me. He seems to be in good spirits, but does need prayers.

This past week I have suffered yet another Brian Aneurysm, and series of Strokes.
This seems to be a reoccurring ordeal...
Fortunately thus far I have sustained little to no permanent Damage in regard to my faculties for daily living.


Every time this happens, it is more painful and debilitating than the last, however I always am fortunate to recover very quickly and close to 97.500% of the previous "Normal" Base-Line.

If you would be so kind as to notify the Message-Board somewhere of my condition, that my current Projects will have a small delay, but that everything will be 100% Completed as promised.

Last edited by QwkTrip; Aug 19, 2023 at 07:26 AM.
Reply

Popular Reply

Sep 17, 2023, 01:15 AM
vorteciroc's Avatar
vorteciroc
Supreme Member
15 Year Member
Loved
Community Favorite
Top Answer: 1
 
Joined: Jul 2006
Posts: 2,924
Likes: 803
From: 212 is up in this Bit@#
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: vorteciroc health update

Massive Thanks to absolutely EVERYONE!


I really feel tremendous support from all of you, and it has made recovery so much more manageable!!!


I'm slowly moving around in both Life and on this Forum... and I'm very happy to be doing so!


Truly Thanks for the Thoughts and Support!
:'-(
Old Aug 19, 2023 | 10:16 AM
  #2  
mikeceli's Avatar
Supreme Member
20 Year Member
iTrader: (2)
 
Joined: Jan 2005
Posts: 1,405
Likes: 200
From: S. UTAH
Car: 1989 IROC-Z 305 LB9 AT Convertible
Engine: LB9 305
Transmission: AT
Re: vorteciroc health update

Prayers sent for "vorteciroc's" full and complete recovery and good health!

Reply
Old Aug 19, 2023 | 10:51 AM
  #3  
86iroc504's Avatar
Member
15 Year Member
Liked
 
Joined: Jun 2006
Posts: 405
Likes: 14
From: Nawlins
Car: 86 Camaro
Engine: '03 4.8 vortec
Transmission: 4l60e
Axle/Gears: 3.42
Re: vorteciroc health update

Prayers to him. Get well man
Reply
Old Aug 19, 2023 | 11:22 AM
  #4  
Pocket's Avatar
Supreme Member
20 Year Member
iTrader: (24)
 
Joined: Jun 2005
Posts: 8,122
Likes: 362
From: NC
Car: 91 Trans Am
Re: vorteciroc health update

Best wishes to him
Reply
Old Aug 19, 2023 | 12:23 PM
  #5  
T.L.'s Avatar
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 1999
Posts: 3,047
Likes: 826
From: Colorado USA
Car: '83 Firebird (T/A Clone)
Engine: 350 with L-69 components
Transmission: 700R-4, 2000 RPM stall converter
Axle/Gears: 10-bolt/3.73 ..
Re: vorteciroc health update

Wow, I was not aware of this. I hope he's gonna be okay. He is a wealth of knowledge around here, and seems to be a really nice guy...
Reply
Old Aug 19, 2023 | 01:51 PM
  #6  
skinny z's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2005
Posts: 9,932
Likes: 893
From: 53.0907° N, 113.4695° W
Re: vorteciroc health update

Originally Posted by QwkTrip
Hey, folks...
Thanks for sharing that.
Get well soon Mr. V!
@vorteciroc
Reply
Old Aug 19, 2023 | 04:31 PM
  #7  
mwfrels's Avatar
Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2002
Posts: 255
Likes: 9
From: Humid Houston on the Texas coast
Car: '86 Z28
Engine: SDPC TPI 350
Transmission: WC T5
Axle/Gears: 3.23 posi
Re: vorteciroc health update

Best wishes for a speedy recovery!

M
Reply
Old Aug 19, 2023 | 06:06 PM
  #8  
BBCSwap's Avatar
Member
Liked
Loved
Community Favorite
 
Joined: Aug 2021
Posts: 418
Likes: 66
From: Central Michigan
Engine: SBC Dart 400 Holley 750 Carb
Transmission: 700R4
Axle/Gears: 28 spline 323 gears
Re: vorteciroc health update

Thoughts & prayers sent. Get well soon.
Reply
Old Aug 19, 2023 | 06:47 PM
  #9  
punkmaster98's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Aug 2011
Posts: 1,266
Likes: 203
From: Jackson NJ
Car: 1984 T/A
Engine: LQ4
Transmission: T56
Axle/Gears: Ford 8.8 4.10 gears
Re: vorteciroc health update

Best wishes for a speedy recovery!
Reply
Old Aug 19, 2023 | 06:50 PM
  #10  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (95)
 
Joined: Dec 2004
Posts: 16,929
Likes: 1,016
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: vorteciroc health update

Get well soon
Reply
Old Aug 19, 2023 | 09:55 PM
  #11  
maroe624's Avatar
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2014
Posts: 749
Likes: 39
From: Los Angeles
Car: 92 Z28 Clone
Engine: Vortec 350
Transmission: T-56
Axle/Gears: 3.23 Torsen
Re: vorteciroc health update

GOD bless you and restore your health. Prayers.
Reply
Old Aug 19, 2023 | 11:18 PM
  #12  
IROCZman15's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (25)
 
Joined: Sep 2005
Posts: 1,924
Likes: 329
From: NJ
Car: 1987 IROC-Z
Engine: 406 on N20 w/ EFI
Transmission: P.B. 700R4
Axle/Gears: 12 bolt w/ 3.91
Re: vorteciroc health update

Woah, just saw this.
Yes, defintiely prayers for things to somehow head in a positive direction.
VortecIroc has posted a huge amount of detailed technical information and advice on my forum threads alone, let alone countless other people's posts. He is a much valued member here; truly I hope the seriousness of these episodes does not get worse. Prayers indeed.
Reply
Old Aug 20, 2023 | 04:18 AM
  #13  
Jaysz28's Avatar
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (30)
 
Joined: Jul 2000
Posts: 1,519
Likes: 18
From: Fort Myers, FL
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Re: vorteciroc health update

I hope he is able to recover quickly

It sucks to watch the body attack itself.
Reply
Old Aug 20, 2023 | 07:54 AM
  #14  
ironwill's Avatar
Supreme Member
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2008
Posts: 1,336
Likes: 567
Car: 1986 IROC Z
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.23 Posi
Re: vorteciroc health update

Sorry to hear this; I hope he gets well soon.


Reply
Old Aug 20, 2023 | 12:37 PM
  #15  
TTOP350's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (9)
 
Joined: Oct 2001
Posts: 12,232
Likes: 1,166
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: vorteciroc health update

Wow, had no idea, wishing all our best for a fast and permanent recovery!
Reply
Old Aug 20, 2023 | 04:15 PM
  #16  
alan91z28's Avatar
COTM Editor
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2008
Posts: 1,365
Likes: 216
From: PA
Car: 91/89/85/82 Z28s, 88 TA, 88/88 SC
Engine: SBC and LS variations
Re: vorteciroc health update

God Bless and pray for speedy and full recovery
Reply
Old Aug 20, 2023 | 05:43 PM
  #17  
OrangeBird's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Feb 2012
Posts: 3,939
Likes: 801
Car: 1989 Firebird
Re: vorteciroc health update

Yep, he's one of the good ones, , , , and I wish him the best for a speedy recovery
Reply
Old Aug 20, 2023 | 08:26 PM
  #18  
3.1EyeCandy's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Jan 2001
Posts: 3,188
Likes: 59
From: Conroe, TX
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: vorteciroc health update

Prayers for a speedy recovery for a kind soul with a generous heart.
Reply
Old Aug 21, 2023 | 08:17 AM
  #19  
dmccain's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Mar 2014
Posts: 4,557
Likes: 817
From: South Ms
Car: 89 Firebird
Engine: 355 TBI
Transmission: 700R4
Axle/Gears: 10 Bolt.Posi-3.73s
Re: vorteciroc health update

Praying for this good mans health and recovery
Reply
Old Aug 21, 2023 | 03:46 PM
  #20  
TylerSteez's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2013
Posts: 1,494
Likes: 99
From: CT
Car: 86 Trans Am WS6
Engine: 383 stroker
Transmission: 700r4
Axle/Gears: 9 Bolt Torsen 3.70
Re: vorteciroc health update

Hoping for a speedy recovery
Reply
Old Aug 27, 2023 | 11:47 AM
  #21  
Duane's 91 Z/28's Avatar
Senior Member
20 Year Member
Liked
iTrader: (1)
 
Joined: Sep 2005
Posts: 871
Likes: 4
From: Yreka, in the State of Jefferson
Car: 1991 red Z/28
Engine: 350 TPI
Transmission: T5 swap
Axle/Gears: 3.42
Re: vorteciroc health update

Praying in Jesus Name for a full recovery and a lifelong of great health.
Reply
Old Aug 29, 2023 | 08:26 AM
  #22  
ratsnotmice's Avatar
Junior Member
 
Joined: Feb 2021
Posts: 9
Likes: 5
From: Arkansas
Car: 1989 IROCZ
Engine: LS2
Transmission: TH350
Axle/Gears: Moser 9in 3.70 Trac lock
Re: vorteciroc health update

Prayers!!
Reply
Old Sep 17, 2023 | 01:15 AM
  #23  
vorteciroc's Avatar
Supreme Member
15 Year Member
Loved
Community Favorite
Top Answer: 1
 
Joined: Jul 2006
Posts: 2,924
Likes: 803
From: 212 is up in this Bit@#
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: vorteciroc health update

Massive Thanks to absolutely EVERYONE!


I really feel tremendous support from all of you, and it has made recovery so much more manageable!!!


I'm slowly moving around in both Life and on this Forum... and I'm very happy to be doing so!


Truly Thanks for the Thoughts and Support!
:'-(
Old Sep 17, 2023 | 09:15 AM
  #24  
skinny z's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2005
Posts: 9,932
Likes: 893
From: 53.0907° N, 113.4695° W
Re: vorteciroc health update

Reply
Old Sep 17, 2023 | 01:43 PM
  #25  
mikeceli's Avatar
Supreme Member
20 Year Member
iTrader: (2)
 
Joined: Jan 2005
Posts: 1,405
Likes: 200
From: S. UTAH
Car: 1989 IROC-Z 305 LB9 AT Convertible
Engine: LB9 305
Transmission: AT
Re: vorteciroc health update

Good to hear of your recovery!
Reply
Old Sep 18, 2023 | 07:15 PM
  #26  
vorteciroc's Avatar
Supreme Member
15 Year Member
Loved
Community Favorite
Top Answer: 1
 
Joined: Jul 2006
Posts: 2,924
Likes: 803
From: 212 is up in this Bit@#
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: vorteciroc health update

Yeah!


Face it...
All you Guys (and maybe even Gals) are FU@KING AWESOME!!!
Reply
Old Sep 30, 2023 | 12:43 AM
  #27  
vorteciroc's Avatar
Supreme Member
15 Year Member
Loved
Community Favorite
Top Answer: 1
 
Joined: Jul 2006
Posts: 2,924
Likes: 803
From: 212 is up in this Bit@#
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: vorteciroc health update

I definitely Rant from time to time...
But not usually about My Own Health.


My Health has improved in all areas except for two.
I am still pushing myself to be optimistic...
However my concern is not really for myself at this point (whatever my future is, it is).


My concern is for my current Customers.

As everything else has been improving...
The ability to use/ feel my Left Hand/ Fingers has worsened and worsened (to the point it is now scaring me).
The Hand is useless/ unable to feel/ hold anything.
Second, I am experiencing a significant of Cognitive/ Intellectual Decline (the thought of loosing my Intellect is even more frightening to me).

I am excepting the fact that this time, I am finally not going to be relatively "Normal" Again.
I have had these Brain Aneurysm, and Strokes several times now and have previously come out okay.
I see now that my luck has run out here.

I have two Customers currently with the Majority of their corresponding Projects completed...
(I do not believe they are on the forum often enough to come across this... this Post is not for them regardless... this is simply a Rant... as I am losing it (so to speak) at the moment.
There are back-ordered Parts that still have not come in, and thus there is some additional work to complete for these Projects.

My main concern and reason for this Post, is that my Two customers are taken care of.


It is ironic that I gave my Customers all Parts at Whole-Sale Cost (Zero Profit for me).
I also did not charge them any Labor.
They are essentially getting 100% Free Work.
Something that I have always been happy to do... I love to give free help here too!

Okay... you are saying whats Ironic?
I need to hire someone to continue/ help me to continue to finish these Two Projects.
If I had made a Profit on these Projects, then I could have given said Profits to the Person that I hire as payment, to Finish the Projects.


LMAO! I even went over estimate on these Projects and have been paying out of pocket to keep them going.
All I wanted to do was something nice for a couple of Forum Members.
(They were not in need of help or anything, I just wanted to give back to our little community, the same way that many of you guys do).

But nah ...I had to be the nice guy.

So not only did I want to do something Free for some Members, I also ended up Purchasing some of the Parts myself...
And now I am going to also end up Paying for some of the Labor myself.


What a crazy world... the way that things work out sometimes!
No good deed goes unpunished or something like that! LOL!

If anyone actually read through this entire Post/ Rant...
YOU ARE A SAINT!

Last edited by vorteciroc; Sep 30, 2023 at 02:39 PM.
Old Sep 30, 2023 | 07:27 AM
  #28  
Jaysz28's Avatar
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (30)
 
Joined: Jul 2000
Posts: 1,519
Likes: 18
From: Fort Myers, FL
Car: 91 Firebird
Engine: 6.0
Transmission: T56
Axle/Gears: 3.73
Re: vorteciroc health update

It is admirable that you are so committed to helping out your customers that you will do so, even at a personal loss to yourself. If I was closer, I would offer to do the labor just to learn more about wiring in general. The wealth of knowledge you possess is incredible.

I work in healthcare, and see people overcome many set backs from strokes. What i have learned is as we get older, we don't bounce back as quickly as we did when we were younger. Every time it takes more time and work to get back to where they were. The mental part of it is the hardest to overcome. If you accept defeat, you will never recover. Physical therapy is also mental therapy to an extent. It is a good way to measure progress. Just remember any progress is good progress. Even if it isn't as much as you want it to be. Going forward is always better than going backwards.

The hand might still come back around. The blood in your brain may not have been reabsorbed and is still pressing on the nerve or area of the brain it is attached too. There is no magic trick to make this happen.

I admire your resolve, and wish you all the best in your recovery. Just remember to breathe, take breaks and then move forward.

-jason
Old Sep 30, 2023 | 07:52 PM
  #29  
84 1LE's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (9)
 
Joined: Nov 2002
Posts: 6,668
Likes: 414
From: Oyth
Car: 89RS vert
Engine: Erod
Transmission: 4L65e
Axle/Gears: BW, 3.27
Re: vorteciroc health update

Oh man. I'm sorry i didn't see this sooner, but i'm glad to see you're doing better.
Reply
Old Sep 30, 2023 | 10:08 PM
  #30  
DynoDave43's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Aug 2013
Posts: 4,844
Likes: 926
From: MICHIGAN
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: vorteciroc health update

Originally Posted by 84 1LE
Oh man. I'm sorry i didn't see this sooner, but i'm glad to see you're doing better.
Same here...sorry I didn't see this sooner. Prayers for a continuing recovery.

Reply
Old Oct 13, 2023 | 09:04 PM
  #31  
scooter's Avatar
Supreme Member
25 Year Member
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Sep 1999
Posts: 4,354
Likes: 308
From: NJ
Car: 92 Firebird
Engine: 4.8 LR4
Transmission: T56
Axle/Gears: 3.45 9 Bolt
Re: vorteciroc health update

Originally Posted by vorteciroc
Second, I am experiencing a significant of Cognitive/ Intellectual Decline (the thought of loosing my Intellect is even more frightening to me).
I am glad to hear you're doing better. I have thought about stuff like this and I feel the same.

Originally Posted by vorteciroc
I need to hire someone to continue/ help me to continue to finish these Two Projects.
I had an ulterior motive when I messaged you a few days ago. If you wind up seeing this I would like to talk to you again about that
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rick King
Classified Ads Feedback Board
5
Sep 19, 2006 10:15 PM
ZZ4 86 Z28
Classified Ads Feedback Board
6
Oct 4, 2005 10:55 PM
FlamedROC
Classified Ads Feedback Board
18
May 25, 2004 04:18 PM
easySPEEDcamaro
Third Gen Association of Ontario
17
Oct 30, 2002 05:53 PM
jermdm
Auto Detailing and Appearance
5
May 19, 2002 03:04 PM




All times are GMT -5. The time now is 05:41 PM.