I replaced the aftermarket wheels on my mustang with 03\04 cobra wheels so i had the old wheels laying around. I had also 2 wheel spacers and adapters so i figured i would test it out to see if they fit the z28 here is the results. first pic is of them on the mustang second pic is the mustang with the new wheels and the third is of the wheels on the z28.

 

I'm not a fan of aftermarket Mustang wheels on your beloved Camaro but the Stang looks nicer...

The wheels look like turbine blades from the awful throttle intake kit imfamously called the "Tornado" below lol

 

LOL there ADR wheels type 54 yes tehy look like turbines never thought of that tho. I was surprised they fit. the fronts are 18x9 and teh rears are 18x10 they have 265 40 18 all around. i use to have 245/40/18 front bfg g forces and 285/35/18 rear and could have gone bigger. i should be able to fit a 315 ib the wheels with no issue and still tucked under the car I have about 1 1/2 inches clearance on the rears before i hit the bump stop and it is still under the lip on the outside. also had no issue turning lock to lock with the 265/40/18 in the front. i also just finished up putting blistiens all the way around.

 

That things needs to be lowered man! That rear almost looks not normal.

Im on the edge with the wheels. Im more of a 5 spoke or mesh style wheel. But I think they look ok just to throw own for giggles just because you own them. If it was lowerd it might look good. Just IMO.

 

Would I buy the wheels no!, but if I had them laying around I might run them as I have seen worse. I love the lip on them, but the style of wheel is not my fav. IMO they looked better on the stang.