ok guys....here is the deal....i am going to be doing an lsx swap and have no use for the gen1 chevy parts the car has....


this thread is to see what i can guage for interest in what will be for sale...the car wont be taken apart till about january


for sale:

custom 3 inch exhaust...all tig welded polished stainless steel which includes a y pipe that is 2.5in merging into the 3 inch intermediate pipe...the muffler on this exhaust is a flowmaster 80 series that is less than 2 years old...the exhaust comes with matching hooker headers that are matched to the flanges on the y pipe...this is a $1500 exhaust....i am looking to get $600 for everything....pictures will be posted if wanted



my motor/trans:

311 cubic inch l69 that had a cam installed with a performer intake and holley carb and uses a mallory unilite distributer...estimated 300hp and i am getting that from the times the car ran at WIR in wisconsin...it ran 14.4@97mph with a bad 60ft (2.3)...it does have some power....the trans is a rebuilt unit with a transgo shift kit (was told from previous owner) and has about 20k on it

i would like $700 for both

other things would be for sale but off the top of my head i am not sure what i am having to pull off...

 

just fyi, i ran a 13.0 at 102 with my 305 and i figured i had 300hp, what calculator are you using?

 

some hp calculater i found online...i was on street tires with a stock suspension....if you went 13.0@102 you had a damn good launch

 

my 305 ran 14.8 bone stock l69

 

sorry, im not bashing your car, just make me wonder some people do some stuff to there 305s and barely run better then my bone stock 98,000 mile 305?guess i got a good 1 from gm ?BUT im not pickin on ya or anything,hope your not offended.

 

i could care less...i bought the car this way and bought it for an lsx swap....


but really if you think about it the car was ran with a stock convertor and really crappy cooper cobra tires...2.3 60ft is a horrible traction issue and 97 mph is good for high to mid 13s

 

I'd like to see some pictures of your exhaust. Where in Wisconsin are you located?

Gary Anderson

 

I am also interested in the exhaust. Where are you located?
Could you post pics up on the thread? Are the headers longtube or shorties?

Thanks
-richard

 

the headers are shorties...they are hookers...i dont have a picture of those tho

i am in green bay wi...the exhaust atm is still on the car because i am still driving it...but soon it will be taken off

 

hey, would you sell the headers seperate? also about the tranny would you sell that seperate? thanks and im in appleton.

 

Thats a three inch inlet on the muffler, right... I might take the muffler back to the tips if thats an option...

 

Do the headers have AIR tubes or an O2 bung? If they have neither i would be very interested in the entire exhaust system. I would be willing to pick this setup up.
Thanks
-richard

 

i will seperate the trans...that i dont have a problem with...but the exhaust was built with these headers and are flange specific so i'd like to keep them together



the headers have an 02 bung that is closed off with a plug and no air tubes


as soon as i buy a winter beater this stuff will be for sale...so be patient...i am shooting for the next month or so


if you have any questions you can reach me at 920-371-7974

 

I would like to purchase the exhaust system, is there a way i can send you some money to hold it for me until you are ready to sell? I will be giving you a call later today.
Thanks
-richard

 

nice talking to ya...the exhaust is yours when i pull the car apart...i will be in touch

 

slim....the exhaust will be off the car real soon...the motor blew on the way home from madison tonight so i have no other reason to have it on the car....so gimmie a few weeks to get it pulled off the car...i a going to try and get the car towed up to green bay sunday

 

sorry to hear, hope the tow isnt terribly expensive. hope to hear from you soon

thanks
-richard

 

do you have any need for any different parts?


i have a brand new radiator and upper motor parts i will be getting rid of for real cheap....i can't use any of this on a lsx motor so its no good to me

performer intake
mallory distributer
holley 600 cfm carb
chrome parts

 

If you could, can you post up which magazine/article the car/exhaust was featured in?

 

i have the mag....but low and behold you CANNOT find **** about it from camaro performers on the damn internet...i tried searching before to show this forum but failed...wtf

 

Just letting you know im still interested in the exhaust.

 

got your message....i am going to try and get the exhaust off this weekend...just trying to get some help...no one is around

actually...the exhaust was damaged when the motor blew so its not for sale....something i didn't see until i got some of it apart...its garbage...sorry man

 

Youre kidding...that really sucks.
What happened that its garbage??