North East Region Regional Board for the North East. Topics like local car shows, cruise nights, good mechanics, machine shops, and so on.

Another PA Dyno Tune day!!!!! See within!

Thread Tools
 
Search this Thread
 
Old May 24, 2004 | 08:59 PM
  #1  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Another PA Dyno Tune day!!!!! See within!

Here's the skinny:

Location
Xotic Motorsports
999 Gap Newport Pike
Cochranville, PA 19330
www.xoticmotorsports.com

Date
Friday, July 2, 2004
This is subject to change somewhat, but the only other expected days would be June 18th or July 2nd. Right now plan on the 25th unless majority decides otherwise.

Tuners Schedule of Fees
Speed Density GM, EEC4 89-96 and EEC5 97-99 Mustangs
Alvin from PCM For Less will be doing the chips
# of cars ------ old customer ------ new customer
-----3---------------$275-----------------$300
-----4---------------$250-----------------$275
-----5---------------$200-----------------$250
-----7+-------------$175-----------------$225
97-99 EEC5 Mustang people need to check with Alvin first to make sure he's got the right setup.

94+ Trans Am, Camaro, and Corvette
Bryan from PCM For Less will be doing the tuning.
$200 for 94-97 LT1 vehicles
$300 for 98+ LS1 vehicles

The catch: If you're getting tuned by Alvin, you will need to pay a 50% fee up front since he will be driving up from North Carolina. If you don't show, DO NOT expect an automatic refund.

Alvin will also be collecting a $75 per vehicle fee in my name for the dyno time. This is to cover myself as I had to eat some money last time due to some no-shows. On the dyno day, you will either receive a refund or be asked for more funds for the dyno time. I will be evenly splitting the $600 fee among all those who pre-paid, and if money is due back you WILL get it back. As you can see I'm anticipating 8 vehicles, and if more show that's great, just makes everything cheaper. Also please note that I will not be profiting AT ALL from this. I'm organizing this because everyone knows it's next to impossible to get a chip equipped car dyno tuned.

I will be posting a link for the pre-payment items hopefully within a couple of days. If you're interested but don't know if you'll make it or be ready, just keep me posted. You'll be able to pre-pay up to the last minute most likely.

The following is the link to pre-pay, the higher prices include the dyno time fee: http://mywebpages.comcast.net/bherter/NEdynoday.html

Who's interested?!?!

Last edited by Fastbird93; May 25, 2004 at 05:08 PM.
Reply
Old May 25, 2004 | 05:08 PM
  #2  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Date has moved back one week to July 2nd. Still on a friday. Reason being is that it's dirt cheap for the dyno on a weekday.
Reply
Old Jun 3, 2004 | 09:05 PM
  #3  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Bump, anyone interested at all?? It's a golden opportunity that doesn't come around too often.
Reply
Old Jun 4, 2004 | 01:04 AM
  #4  
FastZ28*84's Avatar
Junior Member
20 Year Member
 
Joined: Aug 2003
Posts: 85
Likes: 0
From: Annville,PA
Car: 84 Z28
Engine: 72 350 .030 over
Transmission: 89 WC T-5
Would prolly get alot more interest if it was open to carb guys too.
Not that we need a tuner but just to get on the dyno with our cars and hangout.
Reply
Old Jun 4, 2004 | 05:11 AM
  #5  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Originally posted by FastZ28*84
Would prolly get alot more interest if it was open to carb guys too.
Not that we need a tuner but just to get on the dyno with our cars and hangout.
You carb guys are welcome to show up, but the EFI guys getting the tunes will be taking priority. I've got the dyno reservation set up for 10 hours though, so EVERYONE should be able to get on.
Reply
Old Jun 12, 2004 | 02:01 PM
  #6  
Leadball86's Avatar
Junior Member
 
Joined: Nov 2003
Posts: 11
Likes: 0
From: Lancaster Co. PA
Car: 86 Camaro
Engine: 2.8L v6
Transmission: auto
Geesh that place is less then ten miles from my house! I didn't know that there was a dyno that close.
I would not be interested in doing anything with my '86 Camaro, but I do have an 02 WS6 TA that I would like to put on the dyno and see what it puts out.
I'll show up and meet you guys and hopefully get a deal on the dyno.
Reply
Old Jun 12, 2004 | 03:51 PM
  #7  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Originally posted by Leadball86
Geesh that place is less then ten miles from my house! I didn't know that there was a dyno that close.
I would not be interested in doing anything with my '86 Camaro, but I do have an 02 WS6 TA that I would like to put on the dyno and see what it puts out.
I'll show up and meet you guys and hopefully get a deal on the dyno.
We'll get ya worked in somehow!!!
Reply
Old Jun 21, 2004 | 06:00 PM
  #8  
Leadball86's Avatar
Junior Member
 
Joined: Nov 2003
Posts: 11
Likes: 0
From: Lancaster Co. PA
Car: 86 Camaro
Engine: 2.8L v6
Transmission: auto
Is the day still July 2nd? Also what time is everyone plannig to show up?
Thanks
Reply
Old Jun 21, 2004 | 06:02 PM
  #9  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Still on the 2nd, looking like 10 AM to 8 PM.
Reply
Old Jun 24, 2004 | 04:11 PM
  #10  
Leadball86's Avatar
Junior Member
 
Joined: Nov 2003
Posts: 11
Likes: 0
From: Lancaster Co. PA
Car: 86 Camaro
Engine: 2.8L v6
Transmission: auto
Look for me around 4:30- 5:00 providing it isn't raining. The TA doesn't like the rain .

Last edited by Leadball86; Jun 24, 2004 at 04:18 PM.
Reply
Old Jun 24, 2004 | 05:56 PM
  #11  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Sounds good!
Reply
Old Jun 25, 2004 | 08:00 AM
  #12  
ryn28's Avatar
Member
iTrader: (1)
 
Joined: Dec 2000
Posts: 432
Likes: 2
From: Long Island, N.Y.
Car: 1986 Camaro Z-28
Engine: Chevy ZZ4
Transmission: Select Built 700R4
Axle/Gears: Moser Axles / 3.73 Richmond Gears
What about guys running 165ecms(maf)? I'm not sure if I could go or not but it would be interesting and I wouldn't mind having the car dyno tuned. Weather permitting of course, if it rains I'm out since I no longer drive the car in bad weather.
Also, I'm on L.I. and if I went is there anybody from here or close by going where we could meet up? If not I possibly could get my bother to ride shot gun with me.

Oh I forgot to add, I'm already using a Craig Moates memcal card with EEPROMs if that makes it any difference for the tuners.

Last edited by ryn28; Jun 25, 2004 at 10:18 AM.
Reply
Old Jun 25, 2004 | 07:22 PM
  #13  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
Originally posted by ryn28
What about guys running 165ecms(maf)? I'm not sure if I could go or not but it would be interesting and I wouldn't mind having the car dyno tuned. Weather permitting of course, if it rains I'm out since I no longer drive the car in bad weather.
Also, I'm on L.I. and if I went is there anybody from here or close by going where we could meet up? If not I possibly could get my bother to ride shot gun with me.

Oh I forgot to add, I'm already using a Craig Moates memcal card with EEPROMs if that makes it any difference for the tuners.
If you're an 86+ TPI or TBI car, you can be tuned. I know Alvin does the TPI/TBI stuff.

We've got a guy coming from NJ up that way, he's on the NJ F-Body Assoctiation forum under Formula383.

What year/setup is your car??
Reply
Old Jun 26, 2004 | 10:55 AM
  #14  
ryn28's Avatar
Member
iTrader: (1)
 
Joined: Dec 2000
Posts: 432
Likes: 2
From: Long Island, N.Y.
Car: 1986 Camaro Z-28
Engine: Chevy ZZ4
Transmission: Select Built 700R4
Axle/Gears: Moser Axles / 3.73 Richmond Gears
My car is an '86 running TPI. I don't know if I can make it and as of now I don't think I can so pre-paying is a problem. If I did go and could pay all at that time, even if it was slightly more, that would be better for me. I asked about this b/c I'd like to get the car professionally tuned and on the dyno just in case I can make it.
Reply
Old Jun 26, 2004 | 11:39 AM
  #15  
Fastbird93's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2004
Posts: 34
Likes: 0
From: Sicklerville, NJ
Car: 93 Trans Am x 2
Engine: LT1
Transmission: T-56
It's cool. Don't worry about it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ranbo108
Tech / General Engine
14
Sep 9, 2015 12:20 PM
NastyEngines
Group Purchases
4
Sep 8, 2015 10:14 AM
Street Lethal
Miscellaneous Third Gen Items!
0
Sep 7, 2015 01:09 PM
!CamaroDave
Members Camaros
2
Sep 5, 2015 10:39 AM




All times are GMT -5. The time now is 01:43 PM.