yes its on yellowbullet.com for 75,000

 

that's definitely a nasty ride.

stiletto - where's the pics of yours?

 

since you asked here you go





----------

 

^ sexy!

single plate kit and no coil-overs? Whats she run?

 

it has a single plate system and it runs 9.74 @ 140 with 150 kit, it does have PA racing coil overs, k member and control arms.
I am building a 25.5 car right now. it is mini tubbed with stock suspension. i am building the car to run that real street class in immokalee and sunshine.
it will be a 355 with a single 76mm blow through combo.

 

6" cowl looks mean

 

What size tire did you get under with the mini tub?

 

that doesn't look minitubbed with the tire sticking out like that

 

stiletto...HOLY CRAP!! thats a swweeettt sounding car, and beautiful suspension!! launches like a dream thats for sure. and yes...the 6" cowl is awesome!!

 

I also can do ok off a foot brake, doesnt look near as good though, still quick lol

 

Looks like you got the tune right. I cringe when I see a nitrous car make a pass with a bunch of smoke blowing out the back.

 

If he's gonna run real street it will be a 275.

xpndbl3 - he said another car.

stilleto - Why the change from the 4" hood to the 6", I know my 4.5" is enough to have to see around? I haven't been out to many of the outlaw races as of recent, but I got a few shake-down runs in our new car, so I will be soon enough. I know there are a couple boys running in the 5.2x range. - Are you running stock cast/camber plates with coil-overs? I could be wrong, but they appear to just be stockers. I'd think that'd be asking for it with just a rubber bushing mount.

 

it has a 29.5 x 10.5W on the rear.
but i can only use a 275-60-15 in the real street class
----------
the black and white car is not mini tubbed. the pics with the 4" hood has a 15x10 w/5.5 back spacing w 325-50-15
and with the 6" hood pic it has a 15x10 with 6" back spacing and a 28x10.5
the new car that i am building is mini tubbed. and what a job that is, it sucks.

 

i had to buy a new hood... at about a 136mph the 4" one decided it didnt want to stay down so it hit the eject button.
the did have the factory strut mount but now it has pa racing adjustable ones.

 

on the hood. Probably why they reccomend hood pins. - DIY on the new car or having it done? If so, where? any pics of it, or not far enough along yet to be proud?

Have you been down to Immokalee before? I'm about 45min from the track, currently running a 10.5 outlaw car, though at the moment it's only sporting a wennie motor(about a second too slow). Not sure if we'll be ready for the Tomato Nationals next month or not, but I'll atleast be there to watch.

- probably better switch to PM here to not get off topic...

 

Here's Mine

 

nice hood on the blue car^

 

6" It's funny, my car and stilleto's are almost identical except for mine being blue and his being about 2sec faster, lol.

 

Here you go

 

heres mine

 

massey, clean car! i don't particularly care for the foward facing scoop, but clean car nonetheless.

the last picture you posted with the car going down the track with the wind pushing the front spoiler down looks like a dog with his head out the window of a car and his tongue is flapping in the wind, lol!

 

haha, yea matt it does. i kinda like the drag scoop, but ive always liked them on older cars.

 

after i took the bumper support i was thinking some kids around my car steped on the chin and busted the paint off then someone posted that pic of my car. lol guess i know where the paint went.

 

my car has the SAME pattern on the chin spoiler, like someone bent it dow with their foot. im thinking of taking the chin off and putting a 2"strip of aluminum.

 

Yeah, the forces on the front of our cars (or any for that matter) is pretty crazy at speed. Our track photographer took some top end shots one weekend and it's insane what some of the body panels looks like, a couple of T/S cars lexan windshileds looked like they were pushed in a good 1" in the middle.

 

Some flex addiative in your paint helps with that. Anyway bad *** looking picture moving..

 

I put a aluminum brace from the core support out to the nose and spoiler after removing my bumper support, worked great, hardware store tubbing and pop rivets!

 

Scott you can't make mention of that and not post a pic

 

i agree, this is the internet...pics or it doesn't exist lol!

i'm thinking just make the car a sportcoupe and it'll handle whatever you throw at it.

 

Okay,okay...it`s 2 degrees out, lemme grab my slippers and run out to the garage and snap a few, give me a minute

 

bwahahaha! take your time my friend.

 

I'll take that 2 degrees it was -17 when i left for work lol. I'll post up some pictures of my junk when i find all the pictures from last season. getting it ready for a heads up class. anybody else running a no GFX car? (besides mw)

 

geez man.....at LEAST put on a robe too. What must your neighbors think.


It's cold out here as well, I keep pushing my nose against the front room window and see snow everywhere and decide to stay in for a few more weeks.

 

snow? what the hell is that?

 

this white crap we've had on the ground for weeks and weeks. At least I don't feel bad about my car not running when there's no way I could possibly drive it.

 

it was clear down in the low 60's here this morning...plenty cold for me. I moved out of that crap for a reason!- The local track is only close for 2 weekends! Of course I currently need a new motor since I kicked #1 rod at the top a second....interesting "test" of the new chassis components. 3 circles at 90mph after 9 quarts of oil and 2-3 gallons of coolant dumped in front of the rear tires. I didn't hit the wall(rather be lucky than good anyday), so all is well.

I did finally get some completed pics. I'll try to get them posted when I get home.

 

noo good, hate to hear those stories..completed pictures please!

 

yep...3 degrees win chill today in maryland.

naked or not...pics!!!!

 

Hahaaa, Lol...guys it`s not some fabed wonder just some aluminum square tube pop rivited together, I will get some pic`s, maybe for christmas morning!

 

great story - I didn't hit anything! Actually, that happend two weekends ago. I just hadn't said anything on here. Did 2 complete circles, plus another 90, stopped within 1' of the opposite side wall. We went to roll the car back to hook the wheeler up and I said, "hummm, I thought this Kirkey was blue, not brown....." Good news is it went a 6.65 on the initial shake-down pass and I could have let go of the wheel when I let go of the t-brake. All motor, shifting at around 6k(motor made peak power around 8600). edit; needed to say made, not makes - lol

I'm certain we're in for 5.8-.9's on motor and we'll see what a 250 shot does for it. We should be back up in a 2-3 weeks. Had not planned on leaving that motor in long, just checking a few things out on it(obviously we found a problem.... ) while awaiting the block work on the 468. It did tap one head so now I've got to wait on it getting welded first.... Hopefully by summer we'll be ready for the blower motor. It's patiently waiting on the stand.

 

shagwell any more info on your combo?

 

which one?
This car is a legal 10.5 outlaw chassis. There's some pics on either the first or second page. I will go mid 4's once the blower motor is in whether or not my driving is up to snuff.....

- motor that spit a rod - 445ci(+.100 427) 4340 crank, BME .150 long aluminum rods, TRW pistons(12.5:1), old-school GM aluminum square port heads(winter's "snowflake" d-ports), .714 Cam Motion solid roller.
- 468 that's going in to base-line the chassis - 5140 crank, BME .250 long aluminum rods, JE pistons(12.5:1), same heads(as soon as they're fixed), .730 Isky roller. +NOS plate
- blower motor - 477ci tall deck. Callies magnum crank - Childs & Alberts .400 long aluminum "club" rods, JE pistons(12:1), Dart 360's, custom Comp blower cam, 1471 Littlefield hi-helix w/ delta discharge, Enderle buzzard catcher.

 

Heres mine.



----------

 

beautiful car...looks GREAT from the back. very nice launch as well.

 

Very nice but your webpage isn't working.

 

Well I figure why not I better throw some more pics in the mix. Most people either love it or hate it when they see my car. I like it thats all that matters. Runs 10.80's on motor with pump gas right now.

Before the paint job





To prove it runs on pump gas LOL



After paint job

 

LOVE it, are those the 295/60 tires? Looks brutal.

 

295/65's yep

 

amazing car izcain....have that pic of you running down the road on my desktop. beautiful car, and if you dont mind..specs? interior pics? thanks its an awesome car!!

 

total wrong backspacing on those rims? Looks like only 3.5" on a 8" rim or so because of that bulge. Get them tucked under the wheelwells and lower the rear and it would look killer.