1988 Camaro | Turbo 5.3 | No Prep Build
#1
Junior Member
Thread Starter
1988 Camaro | Turbo 5.3 | No Prep Build
Hi guys. I'm new to the forum. I just wanted to introduce myself.
In the upcoming winter months I plan on reviving a 15 year old project. It's kinda a long story but in short, I bought an 88' IROC some 15 years ago and was prepping it for a road course car. My brother at the time was in to doing body/paint work on the side at his shop [where this car is located]. He had the body all stripped down to bare metal. We had a falling out and he shoved the car outside where it has sat ever since. I've checked on the car from time to time. The rust isn't as bad as you'd think but it's not pretty. I've had the thought of turning it into a no prep car. I have a ton of spare parts and just about everything to build the car with. I figure it'd make some good content with my new channel also. I'll post some pics as I get started. Here is what I have acquired so far.
There are many, many things I still need to get chassis and suspension wise, but I figure the time has come for me to start on this project so I can start doing some of the back of the track stuff. Anyways, that is all for now.
-The Unofficial Garage
In the upcoming winter months I plan on reviving a 15 year old project. It's kinda a long story but in short, I bought an 88' IROC some 15 years ago and was prepping it for a road course car. My brother at the time was in to doing body/paint work on the side at his shop [where this car is located]. He had the body all stripped down to bare metal. We had a falling out and he shoved the car outside where it has sat ever since. I've checked on the car from time to time. The rust isn't as bad as you'd think but it's not pretty. I've had the thought of turning it into a no prep car. I have a ton of spare parts and just about everything to build the car with. I figure it'd make some good content with my new channel also. I'll post some pics as I get started. Here is what I have acquired so far.
- 5.3 Short Block
- 317 Cast cylinder heads
- BTR Stage II turbo camshaft
- Huron Speed V1 kit
- Precision 76/75
- Precision 50mm BOV & 46mm WG
- Complete fuel system setup for E85
- Holley Terminator
- Built powerglide w/trans brake
- 4000 Stall converter
There are many, many things I still need to get chassis and suspension wise, but I figure the time has come for me to start on this project so I can start doing some of the back of the track stuff. Anyways, that is all for now.
-The Unofficial Garage
#3
Junior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Unofficial_G
Organized Drag Racing and Autocross
0
09-01-2022 07:52 PM
rbates74
Engine/Drivetrain/Suspension Parts for Sale
3
01-22-2017 08:53 AM