Pacific Northwest Region Regional discussion board for WA, OR, ID, and BC.

More Questions , I feel stupid

Thread Tools
 
Search this Thread
 
Old Jul 30, 2001 | 07:12 PM
  #1  
DeathZ's Avatar
Thread Starter
Member
 
Joined: Mar 2001
Posts: 161
Likes: 0
From: Langley,BC,Canada
More Questions , I feel stupid


Okay , here is the carb I want ..... $600 CDN well with my deal its $420. It says as shown in the picture that ITS NOT FOR COMPUTER CONTROLLED ENGINES. I feel stupid now .... is mine computer controlled .... its the stock carb setup. If its computer controlled what do I have to do for this carb to work for me ????
Reply
Old Jul 30, 2001 | 07:52 PM
  #2  
Demon Z28's Avatar
Supreme Member
 
Joined: Feb 2001
Posts: 1,607
Likes: 0
From: Houston, TX
Car: 2001 Camaro SS
Engine: Almighty LS1
Transmission: T56
Andy, since you're in Canada, I don't think you have a computer controlled carburetor to start with...

The easiest way to find out is look at your distributor, do you have a vacuum advance canister on it going into the carb??

I can take a few pics of what mine looks like for you tomorrow ...

I don't know with canadian cars though, but I really doubt yours is computer controlled, so it'll make the swap easy for you
Reply
Old Jul 30, 2001 | 09:39 PM
  #3  
QwkTrip's Avatar
COTM Editor
25 Year Member
iTrader: (22)
 
Joined: Mar 2001
Posts: 10,425
Likes: 2,089
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Those only cost $200 US with an electric choke. Seems like you need to shop around.
Reply
Old Jul 31, 2001 | 12:14 AM
  #4  
OldBlue's Avatar
Member
 
Joined: Jan 2001
Posts: 252
Likes: 0
From: Utah
even if you car is computer controlled just leave the plug thats on the drivers side of the car unhooked it wont affect your engine. but make sure to have the plug on the right side hooked up I did this to my 83 delta 88 and it ran perfect and I passed emmissions with flying colors and picked up a few horses with the performer intake. you MIGHT have to modify the throttle linkage a little though.
Reply
Old Jul 31, 2001 | 12:46 PM
  #5  
[-sLaYeR-]'s Avatar
Member
 
Joined: Jul 2000
Posts: 232
Likes: 0
From: Maple Ridge, BC, Canada
What year is your car? Demon, why would you think it isn't computer controlled because it's in Canada? At the time, one of the main assembly plants of thirdgens was in Ontario... dont remember if it still is.

I'm pretty sure any thirdgen after '86 Has a computer controlled engine. The carbed ones were early in the third gen. If you have a roc, or TA from 86 up, you do have a comp. You could always gut then computer, but it's gonna be more work than its worth I'm sure. Do you have TPI or TBI? In most cases, not all, but most it is possible to swap TBI for carb. If you did, you would still have to remove a bunch of things.

If you want a definite answer, ask vader, he'll be able to answer that question with facts. (General Tech Section)

Hope this info will help,
Jay

------------------
'91 RS 305 5.0L V8
Bowtie Grill & Lamps, K&N Air Filter, Centerforce Clutch, and of coarse kickass stereo
Reply
Old Jul 31, 2001 | 04:34 PM
  #6  
Demon Z28's Avatar
Supreme Member
 
Joined: Feb 2001
Posts: 1,607
Likes: 0
From: Houston, TX
Car: 2001 Camaro SS
Engine: Almighty LS1
Transmission: T56
Andy's car is an 82 Z

Its not computer controlled
We got it figured out last night he scanned his Distributor for me, hehehe

Pre-TPI cars in Canadia didn't need to be computer controlled for some reason... I'm not 100% sure why though since theres still the emissions BS to worry about up there...
Reply
Old Jul 31, 2001 | 06:43 PM
  #7  
[-sLaYeR-]'s Avatar
Member
 
Joined: Jul 2000
Posts: 232
Likes: 0
From: Maple Ridge, BC, Canada
hmm... never knew that. Learn something new everyday hehe
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frozer!!!
Camaros for Sale
35
Jan 19, 2024 04:55 PM
Cleotiz
Electronics
7
Jan 6, 2018 08:56 PM
redmaroz
LTX and LSX
7
Aug 16, 2015 11:40 PM
gta power
Exhaust
1
Aug 13, 2015 06:15 AM
flash2042
Exterior Parts Wanted
3
Aug 7, 2015 05:58 PM




All times are GMT -5. The time now is 04:21 AM.