305 Long Block complete or parts
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
305 Long Block complete or parts
I have a perfect running 305 long block for sale. It came out of my 87 IROC 2 weeks ago with 84,9xx miles only to be replaced with a 355.
The motor is complete from the heads down. Did not smoke or burn oil ever.
You can have the complete long block for $150
Or parted as:
081 heads w/o rocker arms: $50
Complete roller setup (lifters, pushrods, cam, roller lifters, keepers, and spider tray, timing chain w/gears): $75
Short Block: Just get it out of my garage!!!
The motor is complete from the heads down. Did not smoke or burn oil ever.
You can have the complete long block for $150
Or parted as:
081 heads w/o rocker arms: $50
Complete roller setup (lifters, pushrods, cam, roller lifters, keepers, and spider tray, timing chain w/gears): $75
Short Block: Just get it out of my garage!!!
Last edited by TKO500; 09-04-2005 at 10:29 AM.
#2
Member
Join Date: Mar 2005
Location: lexington, ky
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro 305 tbi
Engine: 305 tbi l03
Transmission: 700r4
it would cost too much to ship the whole block and probably just the heads too but if u can get a shipping quote and the price u would want on the fully assembled heads to 40515 thanks.
#3
Senior Member
Thread Starter
iTrader: (5)
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
I used your zip code and a box of 50lbs which is about what they weigh. Using my corporate rate it is telling me $28 per box so the total shipping would be $56 both heads.
If you want them call it $106 shipped and they are yours.
If you want them call it $106 shipped and they are yours.
#4
Member
Join Date: Mar 2005
Location: lexington, ky
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro 305 tbi
Engine: 305 tbi l03
Transmission: 700r4
this is fully assembled w/ valves and everything...what kinda shape r they in and have they ever been ported? cause im not sayin u will but i have been ripped off a couple of times on larger orders like this and it really sucks when ur puttin all your extra money u got into somethin then gettin somethin u werent expecting!! thanks and just let me know.
#5
Senior Member
Thread Starter
iTrader: (5)
Join Date: Oct 2004
Location: Pelham, NH
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
This is fully assembled heads minus the rocker arms. I am selling the rocker arms as part of the roller package. However as long as you have rockers your all set.
This motor was a perfect running 305. It has 84,9xx miles on it and I only pulled it to drop my built 355 in its place. I would like to sell of as much of this motor as possible since it is such a good motor.
The valves, springs, keepers, studs, everything is there. No burnt valves. I can't stress enough how good this motor was. It just didnt fit the bill for this build up.
For $106 to your door you really cant go wrong. They are stock so never ported. You can bolt them on if you choose. Or build them as needed.
Let me know.
This motor was a perfect running 305. It has 84,9xx miles on it and I only pulled it to drop my built 355 in its place. I would like to sell of as much of this motor as possible since it is such a good motor.
The valves, springs, keepers, studs, everything is there. No burnt valves. I can't stress enough how good this motor was. It just didnt fit the bill for this build up.
For $106 to your door you really cant go wrong. They are stock so never ported. You can bolt them on if you choose. Or build them as needed.
Let me know.
#6
Member
Join Date: Mar 2005
Location: lexington, ky
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro 305 tbi
Engine: 305 tbi l03
Transmission: 700r4
k well if they are in as good a shape as u say then ill take em...by fully assembelled i didnt mean u have to have them assembled i just mean all the parts to fully assemble cause i will have to tear them down to try and port and polish them....let me go home tonight and make sure i have the money in the bank to get these but i should well i know i do actually just gonna make sure so leave your paypal adress and we can get this show on the road just please make sure they are packaged real good and insure them if thats included in the price it should be though if not i think its like 3 dollars more just let me know...thanks
#7
Member
Join Date: Mar 2005
Location: lexington, ky
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 camaro 305 tbi
Engine: 305 tbi l03
Transmission: 700r4
oh yeah and these will be goin to
john stokley III
3369 mt. foraker
lexington ky 40515
and the only reason i cant tranfer the cash till after 3 is im at work and this proxy only lets me in .orgs lol
john stokley III
3369 mt. foraker
lexington ky 40515
and the only reason i cant tranfer the cash till after 3 is im at work and this proxy only lets me in .orgs lol
Trending Topics
#12
Junior Member
iTrader: (1)
Join Date: Mar 2005
Location: Stephenville, Tx
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 305
Transmission: 5-speed
short block and roller set
Hey man how much for the short block and roller set up, Im assuming you mean hydrolic roller, shipped to 76401
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
08-08-2015 08:16 PM