I need all the following stuff....

-A set of hedman long tubes for 82-92 f bods
-set of hedman "s" extensions 2.5"
-TPS, IAC, Knock Sensor, o2 sensor, CTS, IAT and MAP sensor for 350ci Speed Density setup
-Some new motor mounts
-An 89-92 52 or 58mm throttle body accel, BBK or Holley
-a 2500 stall or up lockup torque converter for a 1991 700r4

 

i have brand new knock senser, also like new throttle position senser. $50.00 for both shipped. tom

 

I have a set of long tubes......i sent you an email with a pic.

 

I have a hughes 2500 stall. It has less than 1500 miles on it. I decided to go with a bigger cam so I put a 3000 stall in.
$150 plus shipping

 

I've got a brand new MAP sensor, and good used IAT and CTS sensors. I'll sell you all three for $45 shipped. Let me know, Pat.

 

i have a used (low mileage) O2 sensor... $20 shipped.

 

ok so far ive gotten the headers, s extensions and torque converter...still need all the sensors (ive sent some pms on a few, still waiting to hear back) and throttle body

 

o.k. i'll take $35.00 shipped for the new knock senser and like new throttle position senser, e-mail me at moteener@msn.com tom

 

I have a like new map sensor from a 91. 20 shipped.
Thanks.

 

ok i have gotten the MAP, IAT and CTS sensors all covered, but i still need the following TPI stuff....

-Idle Air Controller
-IAC Housing
-Heated o2 Sensor
-90-92 Speed Density 350 Knock Sensor
-Oil Pressure Sender
-Oil Pressure Switch

 

add to the list...

-a SBC oil pan, 2 piece RMS, drivers side dipstick that will fit in an f body

 

i sent you a pm with a problem we have......

 

sorry bout that

 

Alright..i sent u another pm....should be clear now

 

bump!

 

still need the following

-Idle Air Controller
-IAC Housing
-Heated o2 Sensor
-90-92 Speed Density 350 Knock Sensor
-Oil Pressure Sender
-Oil Pressure Switch

 

bumpity...someones gotta have this stuff