BBSDesigns Turbo Headers; The Last Run
Member
Joined: Apr 2003
Posts: 134
Likes: 0
From: Canyon Country, CA
Junior Member
Joined: Jun 2003
Posts: 65
Likes: 0
From: East Norriton PA
Car: 87 iroc 89 pearl white' black 06gto
Engine: 350 Procharged AFR, T76 383 miniram
Transmission: 700r4, 700r4, LS2 t56
Axle/Gears: 3.73
Re: BBSDesigns Turbo Headers; The Last Run
anybody know if the turbo header will clear either of this belt systems?
http://store.summitracing.com/partde...t=MCH-22021-09
or
http://store.summitracing.com/partde...5&autoview=sku
thanks
Jaime
http://store.summitracing.com/partde...t=MCH-22021-09
or
http://store.summitracing.com/partde...5&autoview=sku
thanks
Jaime
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 608
Likes: 4
From: Isla del Encanto, P.R.
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Re: BBSDesigns Turbo Headers; The Last Run
I am very sorry that I havent replied to messages, emails, etc... I just did not knew what to say or when the headers where going to be finally shipped. Every time I said (And I really thought it was) that the headers where going to be shipped something came and change my plans. Again; please forgive me.
Good news this weekend I got all the headers ported and finally painted. Those with the missing flanges (another reason that they where not ready) are finally welded and completed.
Tomorrow Monday I have to deliver a part to a pharmaceutical so I will not tell you that I will ship them tomorrow because of that(something might happen), but they are going to be shipped out on Thursday, I will take the day out just for that.
Again, very sorry, hope everyone is happy at least when you all get the headers.
Edgardo
Member
Joined: Nov 2003
Posts: 315
Likes: 0
From: upstate new york
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
is that when i should expect my money to be sent back also?
thanks..
thanks..
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
I hate to say this but is anybody else getting ready to start asking for refunds/contacting paypal??? I know BBS for the most part has always had a good reputation on this board... It just seems like we're getting the run around..
Dan
Dan
Senior Member
iTrader: (2)
Joined: May 2003
Posts: 539
Likes: 3
From: Huntsville, AL
Car: 87 GTA, 88 GTA, 92 TA, 72 RS SS
Engine: 350, 350, 305, 396
Transmission: T56, 700r4, 700r4, T56
Axle/Gears: 3.42, 3.23, 3.23, 3.73
Re: BBSDesigns Turbo Headers; The Last Run
I agree, I have been thinking about trying to get my money back through paypal. It’s not cool to take peoples money and then give them the run around.
Member
Joined: Nov 2003
Posts: 315
Likes: 0
From: upstate new york
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
Ive been waiting for a refund for a few months...
and just like the rest of you, i havent seen any progress.
and just like the rest of you, i havent seen any progress.
Member
Joined: Apr 2004
Posts: 380
Likes: 0
From: San Antonio Texas
Car: '91 Camaro
Engine: Mild 283
Transmission: TH400
Re: BBSDesigns Turbo Headers; The Last Run
I'd file w/paypal if its taking this long w/o communication. I never knew why you'd pay this much for a set of headers that really arent that great anyway. Have a local shop fab up a set.
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 608
Likes: 4
From: Isla del Encanto, P.R.
Car: GTA
Engine: Bone Stock 350ci HSR T-76 Turbo
Transmission: T56 6-speed
Axle/Gears: Stock
Tracking Numbers!!!!!!!!!!
TRACKING NUMBERS
Alexander Lipper => 0303 2460 0001 8081 8255
Jaime Vazquez => 0303 2460 0001 8081 8286
James Atkins => 0303 2460 0001 8081 8248
Robert Batt => 0303 2460 0001 8081 8293
David Jackson => 0303 2460 0001 8081 8224
Danny Jaramillo => 0303 2460 0001 8081 8231
Anthony Gould => 0303 2460 0001 8081 8262
Cory Shamblen => 0303 2460 0001 8081 8279
Keith Burch => refund sent via Priority Mail!!! Money Order#93448499984
Daniel Start => Your twin turbo headers will be picked up tomorrow from the ceramic coating and send also.
Please forgive me, I am just up to my nose with work.
Member
Joined: Nov 2003
Posts: 315
Likes: 0
From: upstate new york
Car: 91 camaro rs
Engine: 355, blowthru, 78mm turbo
Transmission: th350, art carr converter
Axle/Gears: stock 7.5, 3.23s, minispool
Re: BBSDesigns Turbo Headers; The Last Run
I have recieved my refund, Thank You very much Edgardo.
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
anybody have ANY updates (other than 5literTPIterror).. Im "supposed" to get my headers in the near future.. (Edgardo said he'd ship them out this weekend). Id feel a little better knowing that you guys PHYSICALLY got the stuff you paid for....
Dan
Dan
Senior Member
iTrader: (2)
Joined: May 2003
Posts: 539
Likes: 3
From: Huntsville, AL
Car: 87 GTA, 88 GTA, 92 TA, 72 RS SS
Engine: 350, 350, 305, 396
Transmission: T56, 700r4, 700r4, T56
Axle/Gears: 3.42, 3.23, 3.23, 3.73
Re: BBSDesigns Turbo Headers; The Last Run
I got mine last week
Joined: Jan 2003
Posts: 949
Likes: 0
From: New Germany, MN
Car: 1986 Iroc
Engine: 5.3
Transmission: 4L80E
Axle/Gears: 9 Inch w/ 3.55
Re: BBSDesigns Turbo Headers; The Last Run
Any one want to back out of a single turbo header? Just throwing it out there. I would like to buy one.
Senior Member
iTrader: (2)
Joined: Apr 2003
Posts: 755
Likes: 0
From: Lombard Il
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Member
iTrader: (2)
Joined: Nov 2005
Posts: 353
Likes: 0
From: Columbus
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
Re: BBSDesigns Turbo Headers; The Last Run
Are the single turbo race ones still avail. std bolt pattern . 13/4 with a t 6 flange for a t88?
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
Re: BBSDesigns Turbo Headers; The Last Run
I have a local fab guy working on a copy of the Single setup out of stainless. Will prob offer a few set in mild steel and ceramic coated.
Member
iTrader: (2)
Joined: Nov 2005
Posts: 353
Likes: 0
From: Columbus
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
Re: BBSDesigns Turbo Headers; The Last Run
is there any pics of the single mout setup in a car. with a t6 flange turbo. mine is a t88
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
mattsv8_03- I know there's pics of single turbo setups on fbodys somewhere on this website... BUT I dont think anybody on here has used a t-6 flange on here..
On a side note.. I hope some of you guys are happy/content with this Group Purchase with BBS Designs... Im not to thrilled at the moment.. Havent received anything from him other than a quick email basically saying that he'll ship them soon.... I'll keep you guys posted..
Dan
On a side note.. I hope some of you guys are happy/content with this Group Purchase with BBS Designs... Im not to thrilled at the moment.. Havent received anything from him other than a quick email basically saying that he'll ship them soon.... I'll keep you guys posted..
Dan
Joined: Jan 2003
Posts: 949
Likes: 0
From: New Germany, MN
Car: 1986 Iroc
Engine: 5.3
Transmission: 4L80E
Axle/Gears: 9 Inch w/ 3.55
Member
iTrader: (2)
Joined: Nov 2005
Posts: 353
Likes: 0
From: Columbus
Car: 89 Camaro rs.
Engine: 357 t88 turbo motor
Transmission: Powerglide
Axle/Gears: 3.55
Re: BBSDesigns Turbo Headers; The Last Run
if it was mild not coted 16 gauge with 3/8 or 1/2 flanges. 1 3/4 setup with a t6 flange crossover pipe . 700. if its stainless and set how i would like it to then more.
Senior Member
iTrader: (2)
Joined: Apr 2003
Posts: 755
Likes: 0
From: Lombard Il
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
I hate bringing up old threads but I just wanted make a post saying as of 12/10/07 I have received my headers from BBS as promised. I'll try to upload pics from my shitty comp... Any comments to quality (not price) are more than welcomed..
Dan
Dan
Senior Member
Joined: Apr 2002
Posts: 531
Likes: 0
From: Northern New Jersey
Car: 91 Firebird Formula
Engine: For me to know.....
Transmission: and you to find out....
Re: BBSDesigns Turbo Headers; The Last Run
One more pic... just for the hell of it.. Its a pic of my "stock TPI parts." If you guys want other pics let me know. Sadly these headers wont be installed for a very long time. Just dont have the money to do the job right.. currently living situation isnt good.. ect ect...
Dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] 1 3/4 budget LS swap headers NEW (CA)
topteam54
LSX and LTX Parts
10
Aug 11, 2015 07:15 PM
