Anyone here using one of these, how do you like it? Any problems with the installation? Thanks.

 

if you get one you may consider getting the NX one, as well as a GEN-II kit from NX, and the switch panel that is offered from them to tie it all together. I have installed a few of these and wow it is nice.

 

I'm using the NX remote opener.


Very nice product.. (If you have the $$ to spend..)




The NX unit literally opens and closes the bottle valve, where as the NOS one (and other brands) are just a solenoid mounted on the nipple.

You can achieve the same thing as the NOS "opener" for a cheapo $60 nitrous solenoid...

 

I guess I am running the inferior NOS opener. Install was simple. No probs with function.

-Schultzy

 

I didn't mean for my post to be offensive. From what I've read, people have a lot of problems with the NOS openers leaking.

 

No prob bud - your post was not offensive. After reading your description I was just giving my opinion. Not offended at all. The NX sounds like a nice piece.

With the bottle mounted in the spare tire area, I just had to have a remote regardless of brand.

-Schultzy

 

I'm trying to find a spot to mount this big 15lb bottle.

I'm almost tempted to see if I can find someone that wants to trade a 10# for my 15#....

Is your bottle a 15# in the spare well? I know you can stuff a 15# & an opener into a 4th gen's spare well. I can't find any info on doing the same in a thirdgen.

 

Mine is a 10lb bottle. There is a bit more room in there but I have not seen a 15lb bottle up close so I am not sure how much larger it is. I created a bit of a platform to mount the bottle brackets on. It is about 3.5 - 4 inches above the bottom of the well. You could probably go even higher and that would give you even more room.

-Schultzy