What is need to make this engine handle a turbo?
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 754
Likes: 0
From: South East MI
Car: 1992 Camaro RS AKA Big Nasty
Engine: Carbed '79 350 block, 360hp/380ftlbs (flywheel)
Transmission: 6speed from an unidentified 4th gen. ask me, ill tell you.
What is need to make this engine handle a turbo?
I have been looking around at crate 350s for a while and found this one at a realativley good price. It is supposed to make 360 hp (they didnt give a trq rating, im inquiring about that now) and it might be a good choice for me to get down the road. What could be done to get it up to par to be turbo capable? I know it doesnt have the pistons on there either. Im asking about this and will have an answer soon.
Cast crank – GM 5.7” rods – ARP rod bolts
GM 70cc heads – 2.02”x1.60” stainless valves
Edelbrock Performer RPM intake (Holley)
Speed-pro 291`-.447” lift hyd. cam
Cast crank – GM 5.7” rods – ARP rod bolts
GM 70cc heads – 2.02”x1.60” stainless valves
Edelbrock Performer RPM intake (Holley)
Speed-pro 291`-.447” lift hyd. cam
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 754
Likes: 0
From: South East MI
Car: 1992 Camaro RS AKA Big Nasty
Engine: Carbed '79 350 block, 360hp/380ftlbs (flywheel)
Transmission: 6speed from an unidentified 4th gen. ask me, ill tell you.
thanx for the link
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM