I recently purchased a universal NOS kit that has a single fogger nozzle hp from 50-125. Where should I plumb this??? I used to have a plate kit for my corvette, but this kit came with a fogger nozzle and I have a few ideas, but really need some guidance! I want to have it somewhat hidden...if possible. If not, I was thinking of tapping into the plastic air box, but really, I"m not sure where to put it?

HELP :shrug:

 

I take it that since it is a single nozzle kit it is a dry system? If this is the case then you will want to mount it as close to inline with the TB as possible. Now, I'm not sure of the exact routing of your intake(seeing as how you have a super on it). If it is at all possible (regarding clrearance) you could drill and tap your intake duckting from the bottom and disguse the N02 line with split plastic wire tubing. With a dry system, as long as the nozzle is pointed up the intake, it'll work. Closer to the TB the better. In your case though, I 'd try to put it between your TB and the H2O injection.

Good luck, and enjoy the "throttle in a bottle"
Any more questions, just ask.


~Max

 

the kit is a wet system. the fogger has a soleniod for the nitrous and the fuel like my old plate kit. I want to be able to use it with or with out the superhcarger on.

 

when i was running nos with a nozzle i had it before the throttle body.

 

in the bellows in front of the TB and use one of these so it doesnt fall out. the bushing next to it is shown a NX shark nozzle but you get the idea.

 

With the supercharger you want it on the inlet of the blower, but dry.

 

Where exaclty do I put the nozzle? in the bellows in front of the TB, I'm not exaclty sure where your talking about? Also, My kit is a wet kit that has the soleniod's for nitrous and fuel...???

Thanks for the help you guys!!!:hail: