Need more power
Need more power
Hello all,
Im new to all this just so please excuse my ignorence just turned 16 and bought an 89 Camaro RS, has 305 with 5 speed.
I love it. down to the subject matter tho. I have 2000 extra dollars car looks good and so is interior. So I neeed some suggestions on getting more power and then applying it to the street. I just want around 375 horses and 400 ft/lbs is there any possible way to do this while keeping stock engine (stupid insurance companies say 350 around them and they go crazy!!!). Also still have to have money to apply power to street. If anyone could help me I would appreciate it.
Im new to all this just so please excuse my ignorence just turned 16 and bought an 89 Camaro RS, has 305 with 5 speed.
I love it. down to the subject matter tho. I have 2000 extra dollars car looks good and so is interior. So I neeed some suggestions on getting more power and then applying it to the street. I just want around 375 horses and 400 ft/lbs is there any possible way to do this while keeping stock engine (stupid insurance companies say 350 around them and they go crazy!!!). Also still have to have money to apply power to street. If anyone could help me I would appreciate it. If you have $2k,I would put in a supercharger.Nothing else,short of nitrous is going to give you that kind of power.You can spend the money on heads,cam,intake,or whaterever,but you wont get the HP increase that the supercharger will give you.
Nitro Don
------------------
1990 Trans Am WS6
305TPI 700R4
ENGINE:
150hp NOS kit
March underdrive pulleys
Edelbrock headers(JetHot)
Mac off-road pipe
Flowmaster exaust
Jacobs ultra coil
K&N filter
Fulley ported base,
runners,& plenum
Crane AFPR
Hypertech airfoil
Crane 1.6 rockers
210/220 .533/.544 Cam
W/P Torquer heads
Edelbrock TPI Base
Edelbrock TI Runners
Edelbrock 52mm T.B.
TRANSMISSION:
Richmond 3.73's
Auburn posi
B&M Mega shifter
TCI shift kit
Vette servo
B&M 3-4 upshift kit
TCI Trans Rebuild
2800 stall 9.5" TC
Nitto Drag radials
FUTURE MODS:
BEST RUN:
12.48 @ 109.23 MPH
(with stock heads,cam,intake,and crappy Pep Boy's tires)
[This message has been edited by Nitro Don (edited March 08, 2001).]
Nitro Don
------------------
1990 Trans Am WS6
305TPI 700R4
ENGINE:
150hp NOS kit
March underdrive pulleys
Edelbrock headers(JetHot)
Mac off-road pipe
Flowmaster exaust
Jacobs ultra coil
K&N filter
Fulley ported base,
runners,& plenum
Crane AFPR
Hypertech airfoil
Crane 1.6 rockers
210/220 .533/.544 Cam
W/P Torquer heads
Edelbrock TPI Base
Edelbrock TI Runners
Edelbrock 52mm T.B.
TRANSMISSION:
Richmond 3.73's
Auburn posi
B&M Mega shifter
TCI shift kit
Vette servo
B&M 3-4 upshift kit
TCI Trans Rebuild
2800 stall 9.5" TC
Nitto Drag radials
FUTURE MODS:
BEST RUN:
12.48 @ 109.23 MPH
(with stock heads,cam,intake,and crappy Pep Boy's tires)
[This message has been edited by Nitro Don (edited March 08, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post




