What size belt for a 3.85 ATi pulley?
Thread Starter
Member
Joined: Jun 2002
Posts: 416
Likes: 0
From: Ocean State, lil Rhody, the biggest littlest state in the union, Rhode Island
Car: 1988 GTA Black/Gray
Engine: Blown 355
Transmission: 700R4
What size belt for a 3.85 ATi pulley?
I'm switching my P1SC procharger to a 3.85 pulley. Anyone know what size belt I'm going to need? Thanks in advance.
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: What size belt for a 3.85 ATi pulley?
On my 4,25" I had 1660mm= 65,35"
I also have a 3.85 pulley that I'm going to put on soon,
I will try a 1653mm=65"
or a 1642mm=64,65"
I'll let you know if you dont get there before me
I also have a 3.85 pulley that I'm going to put on soon,
I will try a 1653mm=65"
or a 1642mm=64,65"
I'll let you know if you dont get there before me
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: What size belt for a 3.85 ATi pulley?
Ok, tested a 1653mm last weekend and it was too long, will try 1642mm this weekend.
What belt size do you have now?
What belt size do you have now?
Supreme Member
iTrader: (7)
Joined: Jul 2000
Posts: 2,047
Likes: 2
From: Prince George, BC, Canada
Car: 89 GTA
Engine: 5.7L Supercharged
Transmission: T-56
Axle/Gears: Moser 9" 3.70
Re: What size belt for a 3.85 ATi pulley?
I use the 1653mm=65 belt on my 4.00" pulley. I can see the 1642mm one maybe working, also depends on brands to cause they all seem to be different then each other.
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Re: What size belt for a 3.85 ATi pulley?
1640mm and alot of work to put it on, but it works.
4.25" = 1660
4.00" = 1653
3.85" = 1640
4.25" = 1660
4.00" = 1653
3.85" = 1640
Thread
Thread Starter
Forum
Replies
Last Post
