spark plugs for patriot heads??
Thread Starter
Member
Joined: Jan 2008
Posts: 218
Likes: 0
From: Austin, Texas
Car: 86 iroc
Engine: 383HSR
Transmission: custom 700r
Axle/Gears: moser 9" 3.90
spark plugs for patriot heads??
i am running the patriot freedoms and am wondering what plug i should use with my nitrous? i will be spraying a 150 shot.
Thread Starter
Member
Joined: Jan 2008
Posts: 218
Likes: 0
From: Austin, Texas
Car: 86 iroc
Engine: 383HSR
Transmission: custom 700r
Axle/Gears: moser 9" 3.90
Re: spark plugs for patriot heads??
what do yall think would be better
http://store.summitracing.com/partde...5&autoview=sku
or these
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
or these
http://store.summitracing.com/partde...5&autoview=sku
Joined: May 2008
Posts: 867
Likes: 1
From: pawtucket RI
Car: 1986 iroc
Engine: alum. head 350 supercharged
Transmission: 6speed
Axle/Gears: ford 9in 3.90 35 spline moser axles
Re: spark plugs for patriot heads??
did you buy the heads new if so they recommend plugs all i know is you have to go 2 heats ranges or so lower when you use nitrous
Thread Starter
Member
Joined: Jan 2008
Posts: 218
Likes: 0
From: Austin, Texas
Car: 86 iroc
Engine: 383HSR
Transmission: custom 700r
Axle/Gears: moser 9" 3.90
Re: spark plugs for patriot heads??
yes they were purchased new! and patriot does not recomend any plug!! i had to find that out for my self.
i know what i need but i would still like further opinions!
thanks, Ted
i know what i need but i would still like further opinions!
thanks, Ted
Joined: May 2008
Posts: 867
Likes: 1
From: pawtucket RI
Car: 1986 iroc
Engine: alum. head 350 supercharged
Transmission: 6speed
Axle/Gears: ford 9in 3.90 35 spline moser axles
Re: spark plugs for patriot heads??
well like i said just start out with a colder plug you can't hurt anything that way and just change still you get the right heat range and watch out for plug to piston contact just spin motor by hand see if they hit first
Thread Starter
Member
Joined: Jan 2008
Posts: 218
Likes: 0
From: Austin, Texas
Car: 86 iroc
Engine: 383HSR
Transmission: custom 700r
Axle/Gears: moser 9" 3.90
Re: spark plugs for patriot heads??
allright all i am wondering is between the two brand i have listed above which would be more resiliant considering the conditions it will be put thru
Joined: May 2008
Posts: 867
Likes: 1
From: pawtucket RI
Car: 1986 iroc
Engine: alum. head 350 supercharged
Transmission: 6speed
Axle/Gears: ford 9in 3.90 35 spline moser axles
Re: spark plugs for patriot heads??
i use autolite 3924 in mine and i don't have any problems with them but its a preference to some some people like other brands good luck
Trending Topics
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: spark plugs for patriot heads??
whatever they recommend for stock motor, go 1 to 2 steps colder on the rating. Gap it tighter at .030-.035 and it shoudl be good to go.
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
evilstuie
Exhaust
24
Feb 28, 2016 03:33 PM
