Weiand Roots
Thread Starter
Junior Member
Joined: Nov 2006
Posts: 30
Likes: 0
Car: 84 Z28
Engine: LG4
Transmission: 700R4
Axle/Gears: 3.23
Weiand Roots
Has anyone used a weiand roots blower, such as the 142 or 144 on the LG4? It said it could add 100 some hp on a 350 so I take it, obviously less on a 305. I figured it would be something that added power until I swap a bigger engine that I could transfer it to as well.
Senior Member
Joined: May 2007
Posts: 276
Likes: 0
From: Woodbridge, NJ
Car: 85 Trans Am / 64 Chevy Nova
Engine: Turbocharged 355ci / 383ci
Transmission: WC T-5 / T10
Axle/Gears: 3.45 / 4.11
Re: Weiand Roots
I don't believe it clears the stock hood... not to mention if your motor is still pretty stock including the carburetor and what not, your pretty limited to the amount of stuff you can do with the supercharger
correct me if im wrong anyone but even if you use a low profile air cleaner, doesn't it still not fit??
correct me if im wrong anyone but even if you use a low profile air cleaner, doesn't it still not fit??
Last edited by gibsongod716; Jun 16, 2009 at 07:55 PM.
Supreme Member
iTrader: (1)
Joined: Jan 2002
Posts: 4,432
Likes: 1
From: garage
Engine: 3xx ci tubo
Transmission: 4L60E & 4L80E
Re: Weiand Roots
Has anyone used a weiand roots blower, such as the 142 or 144 on the LG4? It said it could add 100 some hp on a 350 so I take it, obviously less on a 305. I figured it would be something that added power until I swap a bigger engine that I could transfer it to as well. 

I would guess that the 100HP is predicted for a 350ci making about 200HP stock and the S/C pushes about 8 PSI through it.
Supreme Member
iTrader: (4)
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Re: Weiand Roots
Not positive about the Weiand blower, but I'm using an Edelbrock E-Force blower which is close to the same dimensions and you'll need a 4" cowl hood and a low profile air cleaner to fit everything. -Or you can just get a 6-71 blower and cut a hole!
I've heard of power increase estimates in HP and percentage both. Most small blowers are capable of a 30-50% HP increase, but it all depends on how the engine is set up to handle the boost really.
I've heard of power increase estimates in HP and percentage both. Most small blowers are capable of a 30-50% HP increase, but it all depends on how the engine is set up to handle the boost really.
Thread
Thread Starter
Forum
Replies
Last Post
dimented24x7
Transmissions and Drivetrain
7
Sep 17, 2015 06:58 AM





