"mini blower"
"mini blower"
would it be safe to put one of those weiand or holley single quad blowers on my motor with hyp. pistons? also how much boost can you get out of one of those "mini blowers" and what kind of power gain does it give. my motor is 9.6:1 compression.
with your set-up i wouldn't recommend it, the roots style blower creates alot more heat then a centrifugal blower, your compression @ 9.6:1 is on the very top of the scale for a blown application, so you would not be able to run very much boost without detenation, also the hyper piston are considered very fragile when detenation occurs, one slight lean condition and you'll be replacing your lower end.
this is just my personal opinion
larry
this is just my personal opinion
larry
TGO Supporter


Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
if fuel quality is kept up and boost and timing stays conservative then you could be ok.
Thread
Thread Starter
Forum
Replies
Last Post





