Organized Drag Racing and Autocross Drag racing and autocross discussions and questions. Techniques, tips, suggestions, and "what will I run?" questions.

Picture slide show

Thread Tools
 
Search this Thread
 
Old Sep 20, 2009 | 03:30 PM
  #1  
AlkyIROC's Avatar
Thread Starter
Moderator
25 Year Member
Liked
 
Joined: Jul 1999
Posts: 17,274
Likes: 171
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Picture slide show

Last Friday night someone took some great launch pictures of my car and finally posted them online. This is from my first pass of the night. About 90 minutes later when I made my second pass, I almost lost the car before the 1/8 mile and had to lift to keep the car from going into the wall.

http://www.flickr.com/photos/evolize...th/3937095050/
Here's the link to many of the cars that attended. I'm not sure exactly how far the tree is away from the start line but the front end is back on the ground as I pass the tree.

Last edited by AlkyIROC; Sep 20, 2009 at 03:35 PM.
Reply
Old Sep 20, 2009 | 07:55 PM
  #2  
mw66nova's Avatar
Supreme Member
20 Year Member
iTrader: (13)
 
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Re: Picture slide show

good lookin' pictures, the car looks great stephen!
Reply
Old Sep 20, 2009 | 08:25 PM
  #3  
AlkyIROC's Avatar
Thread Starter
Moderator
25 Year Member
Liked
 
Joined: Jul 1999
Posts: 17,274
Likes: 171
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Picture slide show

Video would be so much better but I did manage to gain a little information from the pictures. I went into my browser cache after viewing the pictures to capture the large ones. I can still only blow them up just so much before losing quality.

I can see a good wrinkle in the tire but it's not perfect. The wrinkle should be a little more forward so I probably need a little more air. Those only had 7 psi in the tires. The rim isn't being driven into the ground so I'm still not hitting the tires hard enough either.

I also see the MT on the tire when it's at rest then it's over 3/4 of the way around the tire just as I'm pulling the front wheels. You can then see it rotating forward in the next few pictures. There must still be at least a 1/2 turn of tire spin before it hooks up.

My 4-link IC is just below the neutral line and I can't see the back end of the car squatting or rising as it launches. If it is, I can't see it. I may move the IC forward a little bit more to get more squat.

Estimating length by car wheelbase and the distance on the dividing cracks in the concrete, I can estimate the front tires come back down roughly 30' from the start line. There's 2 pictures in a row that show the front end at the same height. With the front suspension fully extended, the wheels are still about a foot off the ground. I don't even have a jack that could lift the front end that high

No wonder everyone comes up to me after a run and say they love the car. I guess I burned a few eyes on that run also. There must have been about 100 people along that side of the burnout box. Someone posted in another forum that my alcohol fumes were so bad that eyes were watering. The car was running pig rich but was making good MPH.
Reply
Old Sep 20, 2009 | 10:16 PM
  #4  
t-top havoc's Avatar
Supreme Member
iTrader: (3)
 
Joined: Jun 2009
Posts: 2,350
Likes: 3
From: Mid West
Car: '87 Camaro
Engine: '92 Carb'd 350
Transmission: 700r4
Axle/Gears: factory stock
Re: Picture slide show

Reply
Old Sep 22, 2009 | 06:57 PM
  #5  
greezemonkey's Avatar
Supreme Member
20 Year Member
iTrader: (14)
 
Joined: Jan 2004
Posts: 1,761
Likes: 4
From: The "D"
Car: A Portly 85 Z28
Engine: 4.530 X 4.250 BBC
Transmission: under rated for this application
Axle/Gears: also under rated
Re: Picture slide show

BAD AZZ!!!
Reply
Old Sep 22, 2009 | 07:34 PM
  #6  
articwhiteZ's Avatar
Supreme Member
15 Year Member
iTrader: (56)
 
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Picture slide show

your hole shot. sort looks like mine... yours is up a bit more... mine go's about 6" to 8" for about 20 feet.. dont you love how every body digs the hard hole shot cars..

i run about 13psi in my ET streets.. with the 60' times in the 1.54's but it's been a long time.. will have to get it back out and running agen..

good looking GM you have there
Reply
Old Sep 27, 2009 | 03:08 PM
  #7  
AlkyIROC's Avatar
Thread Starter
Moderator
25 Year Member
Liked
 
Joined: Jul 1999
Posts: 17,274
Likes: 171
From: 51°N 114°W, 3500'
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
Re: Picture slide show

I was given this picture last Friday and finally got it scanned into my computer. Good burnout shot from the top of the tower. A black car on a black surface sure is hard to photograph. Good thing I have the flames.

Reply
Old Sep 27, 2009 | 03:23 PM
  #8  
articwhiteZ's Avatar
Supreme Member
15 Year Member
iTrader: (56)
 
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Picture slide show

kewl photo..
ill try to get mine up before the snow hits.
just sold one of my Guns. now iv got $10.000 to play with will try to get it back up and running. sold the Hk21. this is a Video of it

http://www.youtube.com/watch?v=A6tZXnUZIhg

in the last week of taking photos and looking at others Z28's
i have to get mine up and running agen... think i can do it for like $5000
short block (block rods pistons) 415/420 cid? $3000?
no see ems (you know..the ..i got to fix that too??)$1000
and a grand for the fresh stuff ill need $1000

Last edited by articwhiteZ; Sep 27, 2009 at 03:29 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thefirebirdm@n
South Central Region
3
Sep 14, 2015 01:45 PM
chubsworth
Exhaust
5
Aug 26, 2015 02:34 AM
Armored91Camaro
Electronics
0
Aug 25, 2015 12:01 PM
Cleotiz
Electronics
3
Aug 23, 2015 12:07 PM
ryanz281988
Members Camaros
2
Aug 8, 2015 06:45 AM




All times are GMT -5. The time now is 05:05 AM.