88' Camaro Cig Lighter Wanted
Thread Starter
Junior Member
iTrader: (1)
Joined: Jun 2018
Posts: 34
Likes: 0
Car: 1988 IROC Z Camaro
88' Camaro Cig Lighter Wanted
Hi,
My cig lighter socket is broken, keeps blowing the ACC fuse. I need a new one if anyone has one contact me! The part I'm looking for is the silver metal piece in the pictures.
My cig lighter socket is broken, keeps blowing the ACC fuse. I need a new one if anyone has one contact me! The part I'm looking for is the silver metal piece in the pictures.
Joined: Dec 2004
Posts: 16,751
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: 88' Camaro Cig Lighter Wanted
https://m.ebay.com/itm/gm-chevrolet-...8AAOSwZJBYAEKj
According to Brock’s part numbers this should be what you need
According to Brock’s part numbers this should be what you need
Joined: Aug 1999
Posts: 5,261
Likes: 461
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 88' Camaro Cig Lighter Wanted
That one seems too short Brian, ( looks like the one in my 95Z) so it might fit OK, but will probably not accept a factory lighter......
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
Joined: Aug 2009
Posts: 1,821
Likes: 40
From: Central California
Car: 92 Camaro RS
Engine: LO3
Transmission: T5
Axle/Gears: stock
Re: 88' Camaro Cig Lighter Wanted
I have a few clean tested good ones with good lighter inserts as well if nothing else works out. Get me an email address for pics and other info
Henry
Henry
Joined: Dec 2004
Posts: 16,751
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: 88' Camaro Cig Lighter Wanted
That one seems too short Brian, ( looks like the one in my 95Z) so it might fit OK, but will probably not accept a factory lighter......
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
Thread Starter
Junior Member
iTrader: (1)
Joined: Jun 2018
Posts: 34
Likes: 0
Car: 1988 IROC Z Camaro
Re: 88' Camaro Cig Lighter Wanted
That one seems too short Brian, ( looks like the one in my 95Z) so it might fit OK, but will probably not accept a factory lighter......
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
I'll look around later tonight to see if I've got a decent stock / used one somewhere and will re-post once I can check into it.
FYI: This same Lighter/Housing/assembly ( whatever ! ) was also used in the 80's S10 & Blazer.
Trending Topics
Joined: Mar 2002
Posts: 854
Likes: 10
From: Rincon, Ga.
Car: 91 Camaro RS
Engine: 305 TPI conversion.
Transmission: T56
Axle/Gears: 3.73 posi 4th gen rear
Re: 88' Camaro Cig Lighter Wanted
i also have a few. possibly the lighter as well
Thread
Thread Starter
Forum
Replies
Last Post
82 Iron Duke
Interior Parts for Sale
7
Sep 26, 2006 09:51 PM