[OH] Parting out 94 Camaro
11-05-2015, 02:42 PM
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Parting out 94 Camaro
Parting out 94 Camaro T-Top (was an RS V6).
I know this is 'thirdgen', but I also know some of you guys like 4th gen interior items in your 3rd gens!
Below is a full list... not all, but a lot is listed. If you have any questions or want to negotiate price.. just let me know. I used priced down from eBay and Hawks prices, so they should be pretty good.
If you want to bundle items we can work out a deal.
Preferably local, but I can ship (shipping price is not included in the listing)... If it is a large item and you know a better price for shipping.. let me know!
(This is my donor car for an LT1 / T56 swap into an 89 V6 / T5, so if I need the item it won't be listed. If you see an item that you might think I need please let me know)
Pictures are by request I have a lot on my phone, but please allow me time.. I work full time!
List:
door interior $25
dash climate control plastic $1
AC dash internals (routing) $1
dash components - $$$?
under steering wheel plastic $1
hush panel drivers $1
gauge cluster dash trim $5
gauge cluster $10
rear seats $5
rear trunk interior fabric $1
rear hatch plastic (3 pieces) $10
Steering air bag $8
T-Top A-Pillar Trim Passenger $8
T-Top A-Pillar Trim Driver $8
Door Sill Plates (pair) $2
Kick Panel Passenger $5
Kick Panel Driver $5
Rear view mirror w/ map lights $5
Rear Seat trim drivers plastic $15
Rear Seat trim passengers plastic $15
Rear Spoiler $20
Fender deflector Passenger $2
Fender deflector Driver $2
headlight plastic panel $18
headlight harness $5
tailight harness $4
Camaro filler panel (rear) $20
rear bumper cover $25
windshield cowl trim $1
radio, BT / USB / single din (aftermarket) - sold
Driver's Fender - sold
Passenger's Fender - sold
Hood - sold
dash mount bracket - gone
dash large section for airbag deploy (glove compartment not included, broken) - sold
dash air bag - sold
Back hatch - gone
manual center console (hinge broken) - gone
center console lid - sold
gas tank - sold
rims (center caps included) - sold
rear interior cargo door - sold
Steering Column - sold
Steering wheel - sold
hood hinges - gone
radio, BT / LCD / USB / double din (aftermarket) - sold
Rear hatch trim drivers plastic - sold
Rear hatch trim passengers plastic - sold
Driver's side door buttons - sold
Passenger's side door buttons - sold
Driver's Door Electric - sold
Passenger's Door Electric - sold
Passenger mirror powered - sold
driver mirror powered - sold
Front bumper absorb pad - gone
Front bumper cover - sold
tail lamp passenger - sold
tail lamp driver - sold
rear bumper absorb - gone
used hood lift pair -gone
T-Tops - sold
Rear end - sold
Rear disk brakes - sold
Front assembly (includes disk brakes, a arms, stock k member, steering rod) want it gone, as is condition, will need work - gone
LT1 gauge cluster skin - sold
LT1 Z28 custom symbols - sold
More parts than listed, let me know..
If you have any other questions or concerns just let me know, this is the first time owning a 4th gen (to part out!), so if am missing an item in a 'combo' request or if the previous owner put z28 / SS items on the car.. just let me know (I won't increase the price because I didn't know the difference between an SS item or not).
Thank you!
I know this is 'thirdgen', but I also know some of you guys like 4th gen interior items in your 3rd gens!
Below is a full list... not all, but a lot is listed. If you have any questions or want to negotiate price.. just let me know. I used priced down from eBay and Hawks prices, so they should be pretty good.
If you want to bundle items we can work out a deal.
Preferably local, but I can ship (shipping price is not included in the listing)... If it is a large item and you know a better price for shipping.. let me know!
(This is my donor car for an LT1 / T56 swap into an 89 V6 / T5, so if I need the item it won't be listed. If you see an item that you might think I need please let me know)
Pictures are by request I have a lot on my phone, but please allow me time.. I work full time!
List:
door interior $25
dash climate control plastic $1
AC dash internals (routing) $1
dash components - $$$?
under steering wheel plastic $1
hush panel drivers $1
gauge cluster dash trim $5
gauge cluster $10
rear seats $5
rear trunk interior fabric $1
rear hatch plastic (3 pieces) $10
Steering air bag $8
T-Top A-Pillar Trim Passenger $8
T-Top A-Pillar Trim Driver $8
Door Sill Plates (pair) $2
Kick Panel Passenger $5
Kick Panel Driver $5
Rear view mirror w/ map lights $5
Rear Seat trim drivers plastic $15
Rear Seat trim passengers plastic $15
Rear Spoiler $20
Fender deflector Passenger $2
Fender deflector Driver $2
headlight plastic panel $18
headlight harness $5
tailight harness $4
Camaro filler panel (rear) $20
rear bumper cover $25
windshield cowl trim $1
radio, BT / USB / single din (aftermarket) - sold
Driver's Fender - sold
Passenger's Fender - sold
Hood - sold
dash mount bracket - gone
dash large section for airbag deploy (glove compartment not included, broken) - sold
dash air bag - sold
Back hatch - gone
manual center console (hinge broken) - gone
center console lid - sold
gas tank - sold
rims (center caps included) - sold
rear interior cargo door - sold
Steering Column - sold
Steering wheel - sold
hood hinges - gone
radio, BT / LCD / USB / double din (aftermarket) - sold
Rear hatch trim drivers plastic - sold
Rear hatch trim passengers plastic - sold
Driver's side door buttons - sold
Passenger's side door buttons - sold
Driver's Door Electric - sold
Passenger's Door Electric - sold
Passenger mirror powered - sold
driver mirror powered - sold
Front bumper absorb pad - gone
Front bumper cover - sold
tail lamp passenger - sold
tail lamp driver - sold
rear bumper absorb - gone
used hood lift pair -gone
T-Tops - sold
Rear end - sold
Rear disk brakes - sold
Front assembly (includes disk brakes, a arms, stock k member, steering rod) want it gone, as is condition, will need work - gone
LT1 gauge cluster skin - sold
LT1 Z28 custom symbols - sold
More parts than listed, let me know..
If you have any other questions or concerns just let me know, this is the first time owning a 4th gen (to part out!), so if am missing an item in a 'combo' request or if the previous owner put z28 / SS items on the car.. just let me know (I won't increase the price because I didn't know the difference between an SS item or not).
Thank you!
Last edited by Fechin; 03-05-2018 at 06:00 PM.
11-18-2015, 12:54 PM
#3
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Glove box door was broken (trashed), so that is why it was like this in the picture.
Small crack where tray sits. Lid is missing.
Clean plastics, will need cleaning on cloth.
Last edited by Fechin; 10-17-2016 at 10:16 AM. Reason: removed pictures of sold parts
02-04-2016, 08:02 AM
#6
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Still have a lot of parts!
I can bundle.
Let me know what you want.
If you want more pictures, just ask!
I can bundle.
Let me know what you want.
If you want more pictures, just ask!
Trending Topics
02-15-2016, 05:53 PM
#8
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
The driver's seat is in real nasty shape. The cushions and fabric are ripped (pieces from the cushion missing). I would only charge for the rail (which would be electric), but even then shipping would be quote pricey .. I'd ship the whole piece (unless you just want the rail) for $100 (including shipping).. majority of that cost is shipping. PM me if you are interested.
06-03-2016, 09:42 PM
#12
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Last edited by Fechin; 12-15-2016 at 08:16 AM. Reason: removed pics of sold parts
06-03-2016, 09:43 PM
#13
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Last edited by Fechin; 07-19-2017 at 08:47 AM. Reason: removed pics of sold parts
06-03-2016, 09:45 PM
#17
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Last edited by Fechin; 07-19-2017 at 08:52 AM. Reason: removed pics of sold items
08-15-2016, 04:20 PM
#20
Member
iTrader: (3)
Join Date: Nov 2014
Location: Connecticut
Posts: 227
Likes: 0
Received 5 Likes
on
5 Posts
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: WC T5
Axle/Gears: Torsen 3.73
Re: Parting out 94 Camaro
How much for the washer fluid bottle from this car (if you still have it) shipped to 06443?
08-15-2016, 04:27 PM
#21
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
How much for the washer fluid bottle from this car (if you still have it) shipped to 06443?
I still have it!
I'll take a look at shipping when I get home!
08-15-2016, 07:36 PM
#22
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Originally Posted by dbrochard
How much for the washer fluid bottle from this car (if you still have it) shipped to 06443?
09-13-2016, 10:53 AM
#23
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Bump to the top!
Never got a reply for the washer fluid bottle.
Never got a reply for the washer fluid bottle.
09-13-2016, 08:27 PM
#24
Supreme Member
iTrader: (8)
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes
on
4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: Parting out 94 Camaro
What kind of shape is/was the plate between the dash shell and the windshield in (if it was present)?
10-03-2016, 10:46 AM
#27
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Bump!
This stuff needs to go. PM me if you have any interest in any of the items. I also have some v6 items left that I am selling (v6 / t5 partout). I am sure we can work out a deal!
This stuff needs to go. PM me if you have any interest in any of the items. I also have some v6 items left that I am selling (v6 / t5 partout). I am sure we can work out a deal!
12-05-2016, 10:07 AM
#29
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Bump!
Updated sold items.
Let me know what you want, we can make a deal.
Will respond ASAP!
Updated sold items.
Let me know what you want, we can make a deal.
Will respond ASAP!
12-15-2016, 08:25 AM
#30
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Bump! LOWERED SOME MORE PRICES!
Updated sold items.
Let me know what you want, we can make a deal!
If you have questions, ask!
Updated sold items.
Let me know what you want, we can make a deal!
If you have questions, ask!
03-01-2017, 01:50 PM
#35
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
Originally Posted by 95Cam86Roc
Do you have a lower shift boot?
Zip for ship estimate?
03-01-2017, 06:31 PM
#37
Junior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Chevy Camaro RS
Engine: V6, 2.8L Fuel Injected
Transmission: Manual, stock
Re: Parting out 94 Camaro
I guess I do not.. previous owner must have had a T5 before swapping in a t56: 
Thread
Thread Starter
Forum
Replies
Last Post
92rsvortec350
Interior Parts for Sale
46
02-22-2016 09:32 PM
AmpleUnicorn88
Exterior Parts for Sale
2
11-26-2015 01:58 PM
Jonesie1978
Camaros for Sale
1
11-10-2015 10:12 AM
zman1969
Engine/Drivetrain/Suspension Parts for Sale
0
10-25-2015 11:16 AM
rwerk91
Camaros for Sale
0
10-08-2015 07:14 PM
